Lugo - Technical description
Lugo - Technical description
Constructed from solid larch wood and laminated wood with a thickness of 19 mm.
Utilizes elastic webbing with a width of 80 mm.
Features elastic webbing with a width of 70 mm.
Made from high resilience polyurethane cold-molded foam HR T35, wrapped in polyester fibre fabric weighing 200 gr/m2. It has a density of 35 kg/m3, providing a bearing capacity of 4.5 KPa at 40% compression. The cushion is fixed.
Composed of high resilience polyurethane cold-molded foam HR T30/C, wrapped in polyester fibre fabric weighing 200 gr/m2. The upper part of the back uses HR T35 foam, also wrapped in the same fabric. The HR T30/C foam has a density of 30 kg/m3 with a bearing capacity of 2.7 KPa at 40% compression, while the HR T35 foam has a density of 35 kg/m3 with a bearing capacity of 4.5 KPa at 40% compression.
Made from black epoxy lacquered steel with a height of 20 cm.
Not available.
Available with Piumafill, consisting of 50% feathers and 50% polyester fibres.
Triss reserves the right to make any technical and material changes without notice to improve quality.
- Lacquer steel feet
- Polyester fibre fabric 200 gr/m2
- Polyurethane foam HR T30/C (2.7 KPa)
- Polyurethane foam T35 (4.5 KPa)
- Solid larch wood and plywood
- Made in Italy
Catalog excerpts
TECHNICAL DESCRIPTION FRAME Solid larch wood and laminated wood, thickness 19 mm SEAT SUSPENSION Elastic webbing, width 80 mm POLYESTER FIBRE FABRIC 200 gr/m2 BACK SUSPENSION Elastic webbing, width 70 mm. SEAT CUSHION PADDING High resilience polyurethane cold-molded foam HR T35 wrapped in polyester fibre fabric 200 gr/m2 35 kg/m3 = 4.5 KPa of bearing capacity* at 40% compression Fixed cushion BACK and ARM PADDING High resilience polyurethane cold-molded foam HR T30/C wrapped in polyester fibre fabric 200 gr/m2 Upper part of back in high resilience polyurethane cold-molded foam HR T35 wrapped in polyester fibre fabric 200 gr/m2 30 kg/m3 = 2.7 KPa of bearing capacity* at 40% compression 35 kg/m3 = 4.5 KPa of bearing capacity* at 40% compression FEET Black epoxy laquer steel. Height 20 cm SOLID LARCH WOOD AND PLYWOOD REMOVABLE COVER Not available OPTIONAL CUSHIONS FILLING Piumafill (50% feathers, 50% polyester fibres). LACQUER STEEL FEET With the aim of improving quality, Triss reserves the right to make any technical and material change without notice. * bearing capacity : capacity of a material to withstand compression
Open the catalog to page 1
