Ascoli - Technical description
1Pages

TECHNICAL DESCRIPTION FRAME Lacquered tubular steel, mechanically welded. SUSPENSION Interwoven elastic webbing, width 50 mm + high resilience polyurethane cold-molded foam padding HR75SR. 75 kg/m3 = 14 KPa of bearing capacity* at 40% compression. SEAT CUSHION PADDING High resilience polyurethane cold-molded foam HR T30/C and polyurethane foam airsoft. T30 kg/m3 = 2,7 KPa of bearing capacity* at 40% compression. All padding is wrapped in 100 % polyester fabric, 450g/m2. Fixed cushion. BACK AND ARM PADDING High resilience polyurethane cold-molded foam HR HR 21M. 21/M kg/m3 = 1,8 KPa of bearing capacity* at 40% compression. All this is wrapped in polyester fabric, 450g/m2. Fixed cushion. POLYESTER FIBRE 450 GR/ m2 STEEL FRAME POLYURETHANE FOAM AIRSOFT (1,0 kPa) POLYURETHANE FOAM T30/C (2,7 kPa) POLYESTER FIBRE 100 GR/m2 + POLYESTER FABRIC FEET Full steel feet, matt black epoxy finish, oven heated. Height 21 cm. BED-SOFA Not available. POLYESTER FIBRE 200 GR/m2 + POLYESTER FABRIC REMOVABLE COVER When in fabric, cover is entirely removable; when in leather, cover is not removable. STEEL FRAME FULL STEEL LACQUERED FEET OPTIONAL CUSHIONS FILLING Piumafill (50% feathers, 50% polyester fibre). With the aim of improving quality, Triss reserves the right to make any technical and material change without notice. * bearing capacity: capacity of a material to withstand compression NB: when leather covered, differents steaches on seat and outsides of the backs and arms, see drawing.