Triflex UCS
6Pages

Triflex UCS Interior parking deck coating system Applications Advantages at a glance ■■ Cost-effective The thin-layer system lasts longer than a simple concrete coating. Intervals between repaints are longer. ■■ Ideal for refurbishments The odourless system can be applied in enclosed areas such as underground car parks or covered interior decks. The simple system build-up means that it is easy to apply. ■■ Improved safety with non-slip finish Infills with various quartz sands provides a non-slip finish to enhance safety for car park users and vehicles. ■■ Colours Triflex UCS is available in a range of colours. This facilitates recognition and orientation among car park users and improves traffic safety. Triflex UCS is a coating which is used on little used parking deck surfaces, e.g. parking spaces. This system, made of epoxy resin (EP), is specially developed for interior decks and underground car parks and offers simple protection in a variety of colours and increased non-slip finish. Tailored solution Triflex UCS is a simple and costeffective solution for car park operators. The thin-layer system with a layer thickness of approx. 1 to 2 millimetres is more than a simple concrete coating and can therefore be used for longer. It improves the appearance of concrete surfaces. Triflex GmbH & Co. KG | Karlstrasse 59 | 32423 Minden | Germany | Tel. +49 571 38780-0 | Fax +49 571 38780-738 | info@triflex.com | www.triflex.com | Date 07/2012

Triflex UCS Interior parking deck coating system 1 The substrate is prepared and primed. 2 Apply the coating Triflex Pox Finish 151 evenly. 4 surface is then The finished with two coats of Triflex Pox Finish 151. 3 The wet coating is sandblast with quartz sand. Compatible system components All the Triflex products mentioned in this system are lab-scale and application coordinated as a result of years of experience. This standard of quality ensures optimum results during both application and use. Triflex GmbH & Co. KG | Karlstrasse 59 | 32423 Minden | Germany | Tel. +49 571 38780-0 |...

Triflex UCS Interior parking deck coating system System description Properties ■■Waterproof thin coating made of epoxy resin (EP) ■■Mechanically strong ■■Solvent-free ■■Odourless ■■Cold-applied ■■Chemical-resistant ■■Variety of colours available ■■Surface design to specification Finish Coating, variant 1 Coating, variant 2 Primer Substrate System design Primer Triflex Pox Finish 151 for sealing the surface and ensuring surface adhesion. Substrate suitability should always be checked on a case by case basis. The substrate must be clean, dry and free of cement bloom, dust, oil, grease and...

Triflex UCS Interior parking deck coating system System description Substrate pretreatment Substrate Asphalt Concrete Epoxy resin coating Mortar, resin-modified Paints Screeds Pretreatment Grinding, milling or dust-free shot-blasting Roughen surface, adhesion and compatibility test Grinding, milling or dust-free shot-blasting; adhesion and compatibility test Grinding or milling, completely remove Grinding, milling or dust-free shot-blasting Primimg Not possible Triflex Pox Finish 151 No primer Triflex Pox Finish 151 See substrate Triflex Pox Finish 151 Information on other substrates is...

Triflex UCS Interior parking deck coating system System description System components For information on applications, conditions for use and instructions for mixing, see product information (request if necessary): Triflex Micro Chips Triflex Pox Finish 151 Triflex Pox Mortar Quality standard All products are manufactured in accordance with the standards defined in ISO 9001. To ensure quality is not compromised, Triflex products are only installed by specialist, fully trained and qualified contractors. Gradient / Evenness Before commencing any surfacing work and during the work itself, it...

Triflex UCS Interior parking deck coating system System drawings Surface coating, variant 1 System design – Detail A Finish: Surface Coating: 2x Triflex Pox Finish 151 Triflex Pox Finish 151 with infill of quartz sand Triflex Pox Finish 151, diluted with 10% water Surface coating, variant 2 System design – Detail B Finish: Surface Coating: 2x Triflex Pox Finish 151 Triflex Pox Finish 151 with mix and infill of quartz sand Triflex Pox Finish 151, diluted with 10% water Substrate Drawing no.: UCS-1401 Height differences between fleece overlaps are exaggerated. Triflex GmbH & Co. KG |...