System brochure Triflex ProDrain
4Pages

Triflex ProDrain® Balcony Uncoupling System The specialist in liquid applied waterproofing

Triflex ProDrain® Balcony Uncoupling System Reliable on difficult substrates Triflex ProDrain is a special solution which is ideal for refurbishing saturated substrates on balconies and terraces. Balcony coating and waterproofing solutions extend the life of balconies and roof terraces. In many cases, however, as the substrate ages it requires increasing amounts of refurbishment, for which the only solution is a triedand-tested, reliable system. Refurbishment is often put off until the substrate is saturated or heavily soiled. At worst, the existing coverings are damaged or the substrate...

Triflex ProDrain® Balcony Uncoupling System Advantages at a glance Ideal for refurbishments With Triflex ProDrain there is no need for the time-consuming and expensive removal of sound substrates. And, thanks to its slim design, low door sills pose no problem at all. Short closure periods The simple system uses quick-curing resins, reducing the length of time each step takes. After just 2 or 3 days, balconies and walkways can be fully utilised by residents again. Reliable on critical substrates Be it tile surfaces, cracked or soiled floors, Triflex ProDrain neutralises stresses between...

1 Prepare substrate, even out surface and remove loose particles. 2 Evenly apply Armatop MP adhesive with a notched trowel. 3 Cut the Triflex uncoupling membrane exactly to size and lay. 4 Roll in uncoupling membrane, applying sufficient pressure. 5 Lay subsequent sheets edgeto-edge to fit precisely. 6 Then evenly apply Triflex Pox R 100 to details and... 8 Dress with quartz sand and allow to cure. 9 For the ventilation, the eaves flashing is prepared... 10 and bonded with Triflex Paste. 11 Waterproof wall junctions and details with Triflex ProDetail. 12 Next, apply the Triflex BTS-P....