PRODUCT FEATURES DELTA is a double flap smoke vent suitable for the removal of large quantities of warm air and / or smoke from a building within a short period of time, daily ventilation and natural lighting. Suitable for utilization on various kerbs and domes. The vents are manufactured according to ISO 9001 quality control standards and comply with the European requirements for NSHE according to EN 12101-2. Endurance tests with 10,000 opening and closing cycles have proven its robust and functional design. The vents are formed from high quality corrosion resistant aluminium to ensure low maintenance requirements and watertightness. Various methods of operation using pneumatic or electric actuators are available. Available on large dimensions, up to 2500 x 3500 mm (width x length). 130, Chemin de La Croze 38 260 Faramans //[email protected] www.tria-france.fr

TYPICAL APPLICATIONS May be installed either onto roofs or into barrel vault daylighting systems. Particularly suitable for warehouses, logistics centres, production environments and industries. Tempered aluminium, sea water and corrosion resistant (EN AW 5754). Corrosion resistant bearings. Sealant applied so that there is no freezing, enabling the equipment to have low air permeability at the same time. Note: aluminum is supplied untreated as standard. Possibility of being supplied with electrostatic painting (in any RAL color). Roof opening width: 1000 - 2500 mm. Roof opening length: 1000...

TECHNICAL DETAILS | DELTA WEIGHT Depends on dimensions and type of infill. OPTIONS Custom dimensions. Powder-coated design (any RAL colour). Bird or insect mesh/ Anti-fall grid 1200 J. REGULATIONS The system has been tested and is certified in accordance with EN 12101-2. Tested in accordance with the Directive 2014/34/EU, DELTA is ATEX certified equipment. Single aluminium. Thermally insulated aluminium. Polycarbonate 16mm, clear or opal. Polycarbonate 25mm, clear or opal. Polycarbonate 32mm, clear or opal. Thermal break in the aluminium profiles. Available for flaps of AL ISO, PC25 mm, PC32...

GENERAL DRAWINGS | DELTA FLANGES Flange for single glass. Flange for double glass. Flange for roofs, 45º bended. Flange for roofs and facades. Flange for upstand, 90º bended downwards. Flange 90º bended upwards. Flange for skylight connection, for different polycarbonate thicknesses. Flange for connection with other flange (vents connection). Male or female connection. Flange for male connection. Flange for female connection Note: custom flange design and insulated flanges upon request. STANDARD INTERIOR DIMENSIONS TYPE DRIVE SUPPORT

GENERAL DRAWINGS | DELTA DOUBLE FLAP SYSTEM WITH SHORT CYLINDERS, DELTA-S Deviating from the standard version, DELTA can also be designed with short cylinders. This variant is used when there is a risk that the cylinders could collide with the existing bottom pipe-work, beams or other objects on site. The DELTA-S variant is available in sizes: Width: 1200 up to 2300 mm. Length: 1000 up to 3000 mm. Bottom Perspective View OPEN opening system Bottom Perspective View OPEN opening system

GENERAL DRAWINGS | DELTA DIMENSION DRAWING FOR DELTA INSTALLATION WIDTH SIDE VIEW CLOSED