Flowfresh RT (6 – 9 mm) Description Flowfresh RT is an easily applied 6 – 9 mm heavy duty, chemical resistant antimicrobial treated polyurethane resin floor screed. Attractive fine textured coloured floor finish with a speckled effect on the surface. Uses Ideal for wet processing zones such as food manufacturing, food preparation areas, and chemical processing plants. Benefits  Contains Polygiene, an antimicrobial additive based on silver ion technology  Ease of application, rake and trowel  Very high chemical resistance  Easy to clean and sterilise anti-slip surface, minimal joints  Heat resistant to 120°C  Steam cleanable  Non tainting, non dusting  High abrasion resistance  Withstands high mechanical stress  Good alternative to expensive acid resistant tiles  Low odour during application  Positive slip resistance Standard colour chart Project References Baxter SA - Belgium, 4m Europe. Nive Nunspeet - Holland, Masterfloor. Fruttagel S.c.r.l. - Italy, APS. Readi-Bake - UK. System Design Dark Green Gentian Blue Dark Grey Primer (if required) Substrate The applied colours may differ slightly from the examples shown above. Contact our customer services for a true colour sample or a special colour match. Special corporate colours and designs can be produced to special o

Model Specification Technical Information Product: Flowfresh RT Finish: Matt Thickness: _____mm (6 or 9 mm) Colour: ____________________ Preparatory work and application in accordance with suppliers instructions. Supplier: Flowcrete UK Ltd Telephone : Customer Service - +44 (0)1270 753000 The figures that follow are typical properties achieved in laboratory tests at 20°C and at 50% Relative Humidity. BFL - s1 Impact Resistance Wear Resistance Bond Strength Concrete or screed substrate should be a minimum of 25N/mm2, free from laitance, dust and other contamination. Check the relative humidity...