Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
TP653_DS_GB_2019-06-11_WEB

TP653_DS_GB_2019-06-11_WEB
3Pages

Catalog excerpts

Description A flexible open cell polyurethane foam impregnated with a flame retardant acrylic resin. The face installed to the internal side of the tape is coated with a thin polymer film. Solvent-free, single-sided self-adhesive for initial location to window frame. TP653 is free from halogen-containing flame retardants, solvent, silicone and (H) CFC’s. Colour Anthracite with black polymer film to internal face Standard Sizes Article Number Size (width/application) Technical Information Property Test Method Building Classification Exposure Class for Impregnated Foam Tapes Weather Tightness Thermal Conductivity U-Value: Window depth 60 mm U-Value: Window depth 70 mm U-Value: Window depth 80 mm Water Vapour Diffusion Vapour permeable to outside Water Vapour Gradient Air Tightness Inside tighter due to polymer film Air Tightness Polymer Film 42 dB in 20mm wide joint; 50dB with more compression Compatibility with Conventional Materials BG1 – given. Perform compatibility test when in contact with solvents or plasticisers Emission Test (indoor air quality) EC1 Plus. Suitable for interiors Life Expectancy Service Temperature Store rolls horizontally and in original carton between +1°C and +20°C in dry conditions and away from direct sunlight. Re-seal packaging between use to prevent expansion during storage Shelf Life 12 months when stored in its original unopened containers Usage / Purpose TP653 is a premium multi-functional tape for the perimeter sealing of windows and doors and is covered on the internal face with the new illbruck polymer film. This results in a high level of air and smoke tightness and a higher sd value to the inside whilst being vapour permeable to the outside. This complies with the principle ‘inside tighter than outside’ per the RAL guideline. Weather tightness and thermal and acoustic insulation is also provided through the whole depth of the perimeter joint. tight to 600 Pa minimum and smoke tight due to new Polymer film technology to the internal face • Meets the strict requirements of Blower Door Tests including smoke generation for Passivhaus construction. • Energy saving through extreme air tightness and thermal insulation • Single product application resulting in more windows fitted per day • Achieves 41 dB sound reduction, increasing to 61 dB if capp

Open the catalog to page 1

TP653 Trio X Preparation • For installation, a measuring tape, cutting shears and sharp cutting knife are required. An illbruck AB006 Tape Belt is also advisable to maintain compression of the remainder of material on a part-used roll. • Ideally the tape should be stored and used at temperatures between 10 - 20°C. High temperatures accelerate the tape expansion process and low temperatures slow it down. • The window opening should be continuous, and free from debris which may protrude into the perimeter joint. • Clean the sides of the window frame. Please Note • Before conducting a Blower...

Open the catalog to page 2

Trio X illbruck making it perfect. Technical Service tremco illbruck has a team of experienced Technical Sales Representatives who provide assistance in the selection and specification of products. For more detailed information, service and advice, please call Customer Services on 01942 251400. Guarantee / Warranty tremco illbruck products are manufactured to rigid standards of quality. Any product which has been applied (a) in accordance with tremco illbruck written instructions and (b) in any application recommended by tremco illbruck, but which is proved to be defective, will be replaced...

Open the catalog to page 3

TP653_DS_GB_2019-06-11_WEB 3Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

TP653_DS_GB_2019-06-11_WEB
3Pages