Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
TP605_DS_GB_2016-10-19_WEB

TP605_DS_GB_2016-10-19_WEB
2Pages

Catalog excerpts

illbruckmaking it perfect. Description TP605 Compriband Super is an acrylic impregnated foam sealant strip which when used under compression by approximately 80% provides a high performance weatherseal (>600 Pa). The product is supplied in roll form pre-compressed and ready for immediate use with a selfadhesive backing. After positioning, the material expands to find its own level and creates a permanent elastic seal. The product remains flexible throughout its life and responds to continual expansion and contraction cycles caused by thermal and structural movement. Colour Anthracite Standard Sizes Recommended Expanded Gap size Tape Width / Joint Thickness Roll Length Size (mm) Depth (mm) (mm) (m) Technical Information Compriband Super Property Test Method Impregnation System -Sealing Performance Under Compression by 80% (supplied pre- DIN EN ISO 1027 compressed by approx 85%) UV Resistance ISO 53387 Result Acrylic Compatibility KIWA - test method Pass Compatibility with sealants has to be DIN EN ISO 12572 <100 1 tested in every case Usage / Purpose TP605 Compriband Super is designed for use internally or externally for the linear sealing of movement joints in a wide variety of construction and civil engineering applications, for example in brick and block work walls, partitions, as a perimeter seal around window and door frames, sealing pre-cast concrete panels, sectional buildings and insulated cladding panels. In-Service Life > 25 years Expectancy Service Temperature -30°C to +85°C All performance figures quoted are averages and subject to tolerances. Key Benefits • Excellent weather resistance - over 600 Pa • Permanently flexible & breathable • In-service life expectancy > 25 years Tape Selection • The tape should be selected so that the roll width (joint depth) is at least equal to the tape thickness (joint width) in service. • For applications outside of this instruction, please consult our sales office.

Open the catalog to page 1

illbruck Compriband Super Preparation No special surface preparation or primers are required but contact surfaces must be clean of dust, dirt, loose matter, grease or oils. Application • Care must be taken not to stretch the material, especially at joints or around bends and corners. Allow an extra 20 mm/m joint length when installing TP605 to allow for potential shrinkage. • A continuous seal can be provided by forming tight butt joints or on thin sections by simply overlapping material. Instructions for use are enclosed in each carton supplied. • The material expands according to the...

Open the catalog to page 2

TP605_DS_GB_2016-10-19_WEB 2Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

TP605_DS_GB_2016-10-19_WEB
2Pages