Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
TP450_DS_GB_2021-05-13_WEB

TP450_DS_GB_2021-05-13_WEB
3Pages

Catalog excerpts

illbruckmaking it perfect. Description TP450 is a soft and flexible open cell polyurethane foam, impregnated with an acrylic based, UV stabilised resin with large joint size tolerance for large movement applications. The resin is water repellent and contains a fire retardant. TP450 has a self-adhesive side to aid initial location and is easy to apply in any weather. Additionally, TP450 has both thermal and acoustic insulation properties. Colour Anthracite Packaging Supplied as pre-compressed rolls with a self-adhesive side to aid initial location. Dimensions Tape width / Tape thickness / Roll joint depth joint width length Technical Information Property Test Method Result Polyurethane cellular foam, Material impregnated with a modified flame retardant artificial resin Building Classification Impregnated with a modified flame DIN 4102 retardant artificial resin B1, self extinguishing, P-NDS 04-229 Thermal Conductivity Vapour Resistivity DIN 52615 p < 100 The requirements of DIN standards Weathering Test DIN 53387 are met Weathertight Against Driving Rain The requirements of the DIN standard are met up to the described joint sizes, giving a minimum of 450 Pa, independently supervised by MPA Hannover Compatability with Conventional Construction Methods No signs of corrosion observed on iron, zinc, steel, galvanised steel, aluminium and copper. No adverse effects with concrete, aerated concrete, brick, some stones, PVC, Plexiglas or timber Service Temperature Store rolls horizontally between +1°C and +25°C in dry conditions Storage and away from direct sunlight. Re-seal packaging between use to prevent expansion during storage. Shelf Life 2 years when stored in its original unopened containers. Tape Specification • The tape should be selected so that the roll width (joint depth) is at least equal to the tape thickness (joint width) in service. For applications outside of this instruction, please consult our sales office. Compriband Timber Max Usage / Purpose TP450 provides a weather tight seal against the most severe combinations of wind and rain, with particular suitability for sealing the head and sills of windows installed in timber frame construction and can accommodate up to 37 mm of differential movement within a max. 50 mm wide joint. Extensively tested with BBA accreditation, TP450 has a proven reputation across both the UK and Europe. Key Benefits • Minimum 450 Pa weather resistance, 600 Pa with the three smaller sizes, to DIN EN 1027 • Accommodates up to 37 mm of joint movement within a maximum 50 mm wide gap • Weather seal for wind-driven rain but breathable for vapour diffusion • Can accommodate differential movement on timber frame construction up to 5 storeys • Seals effectively - no remedial visits or wet sealants • Continually expands and contracts to accommodate movement whilst still sealing the joints • Long life expectancy — BBA Accredited Certificate N° 12/4891 as part of the i3 system.

Open the catalog to page 1

KEY Application as a weather seal to min. 450 Pa; thermal insulation; acoustic insulation Application as a weather seal to 600 Pa; thermal insulation; acoustic insulation Application as a weather seal to 900 Pa; thermal insulation; acoustic insulation Application as thermal insulation; draughts Please Note: * For satisfactory UV resistance, these thicknesses must be protected with eg a cover trim. Where the thickness dimension exceeds the tape width, the stability cannot be guaranteed. Not all weather seal ratings indicated are validated but provided in good faith from a range of tested...

Open the catalog to page 2

TP450 Compriband Timber Max Application Please Note • Detailed application instructions are available from the illbruck website. • Before installation, measure the width of the joint and ensure the total movement, after any settlement, is within the capacity of the selected tape size (Fig 1 & 2). • Cut off the release liner and the opening wedge at the start of the roll. • If installing tape into a construction joint, it may be applied either horizontally or vertically (from bottom to top); however, when applying to a door or window frame the horizontal seals must be applied before the...

Open the catalog to page 3

TP450_DS_GB_2021-05-13_WEB 3Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

TP450_DS_GB_2021-05-13_WEB
3Pages