Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
TN416_DS_GB_2020-12-23_WEB

TN416_DS_GB_2020-12-23_WEB
2Pages

Catalog excerpts

illbruckmaking it perfect. Technical Information Property Composition Life Expectancy UV Resistance Joint Movement Capability Dynamic Tensile Adhesion Separation Rate (100 mm/min @20°C) Dynamic Shear: Separation Rate (200 mm/min @20°C) Moisture Vapour Transmission Rate (Independently tested to BS 15106-3) Application Temperature Range Service Temperature Range Storage Shelf Life Description TN416 is a preformed high performance polyisobutylene (PIB) based sealing tape with enhanced adhesive characteristics for more demanding applications where there are requirements for a high degree of bonding. It is available in single strand or multi-lane rolls Colour White (black and grey also available, subject to minimum order quantity) Size / Quantities 25 mm x 4 mm (18 m / roll) Results PIB based tape In excess of 25 years Excellent Up to 15% 20 N/cm2 to standard 180 grit stainless steel 22 N/cm2 to standard 180 grit stainless steel 0.010 g/m2/24hr/mm at 25°C & 75% RH +4°C to +40°C -40°C to +90°C Store in shaded dry conditions between +4°C and +30°C 24 months when stored as recommended in original unopened packaging. Compatibility Very good adhesion to most surfaces & compatible with most commonly used construction materials. For further information please contact our technical department. Surface Preparation • Ensure substrates are clean, dry and free from dust, dirt, wax, oil, etc., and any loose friable material liable to impair adhesion. Application • The product should be unwound and lightly pressed into position leaving the release paper in place. • On forming the joint, the release paper is removed, and the closing surface pushed firmly in place, pressure applied along the length of the joint and mechanically fixed. Health & Safety Precautions Safety data sheet must be read and understood before use. High Quality Butyl Tape Usage / Purpose TN416 is designed for applications where joints need to be formed to seal against air and water ingress in many markets such as, Roofing and Construction, Glazing, sealing bath & shower splash trims and bonding & sealing applications such as polythene membranes. This product has been developed with the bonding of more difficult materials such as polyethylene sheets used in DPM & DPC applications in mind. The product is cost effective, requires no tools to apply and is simple and easy to use. Key Benefits • Self-wound roll presentation • Solventless formulation • Instant seal • Direct control over quantity of sealant used in the joint • Ease of use • Good adhesion on both faces to most building materials • High pumping resistance

Open the catalog to page 1

illbruck making it perfect. Technical Service Tremco CPG UK Limited has a team of experienced Technical Sales Representatives who provide assistance in the selection and specification of products. For more detailed information, service and advice, please call Customer Services on 01942 251400. Guarantee / Warranty Tremco CPG UK Limited products are manufactured to rigid standards of quality. Any product which has been applied (a) in accordance with Tremco CPG UK Limited written instructions and (b) in any application recommended by Tremco CPG UK Limited, but which is proved to be defective,...

Open the catalog to page 2

TN416_DS_GB_2020-12-23_WEB 2Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

TN416_DS_GB_2020-12-23_WEB
2Pages