Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
TN136_DS_GB_2020-06-05_WEB

TN136_DS_GB_2020-06-05_WEB
2Pages

Catalog excerpts

illbruckmaking it perfect. Results PE 1 - 2 mm = 67 kg/m3 3 mm and above = 50 kg/m3 Double Sided DSX Black +10°C to +30°C -40°C to +80°C 845 kPa 30% for weather sealing 20% for security glazing Store in shaded dry conditions between +10°C and +30°C 12 months when stored as recommended in original unopened packaging Description TN136 is a self-adhesive, polyethylene foam tape with pressure sensitive acrylic adhesive, supplied on easy to use rolls. Packaging Thickness: 1,2, 3, 4, 5 and 6 mm Width: 6 to 950 mm Any width within the range noted above can be cut subject to minimum order quantities. Stock sizes are available and our Customer Services team can supply details as well as advise on cut to order sizes, minimum order quantities and lead time. Technical Information Property Foam Type Foam Density Adhesive Format Adhesive Type Tape Colour Application Temperature Service Temperature Tensile Strength Recommended Compression Storage Shelf Life Preparation • Ensure bonding surfaces are free from irregularities and loose particles which may impair adhesion. • Dust, dirt and grease can be removed using AT115 Solvent Cleaner. • The substrate must always be dry before application of the tape. Application • The width of tape should provide a minimum net 10 mm of contact with the frame rebate to optimise security performance. The thickness should be chosen to achieve 20% compression of the tape when the glazing assembly is completed. • The exposed adhesive face should be unwound gradually, and carefully located onto the surface of the substrate. Care must be taken to avoid compressing or stretching the tape during location - this could induce peeling forces and cause the tape to lift from the substrate. • Once the tape has been positioned then apply even pressure throughout the length using a roller, starting at the centre and moving to each end to avoid stretching. • With double sided tapes the protective release film is not removed until immediately prior to joint assembly. • The assembly must provide sufficient force to compress the tape by 20% of original thickness for security applications and 30% if weatherseal performance is required. Over compression should be avoided. Security Glazing Tape Super PE Usage / Purpose TN136 is a closed-cell, double-sided PE foam tape used to provide high-security glazing of externally beaded windows and doors. Key Benefits • A very cost effective method of maximising security levels of externally beaded windows and doors • Securely bonds the glass unit into the frame making removal from outside virtually impossible • Extensive testing • Meets PAS24:2016 Enhanced security performance requirements for doorsets and windows

Open the catalog to page 1

illbruck making it perfect. • Joints may be made by mitring corners or butting the tape ends tightly together. In all cases the tapes should be cleanly cut at slightly longer length than required to ensure compression of the joining faces, and formation of a tight joint. Please Note Tape must be under minimum 20% compression to achieve an effective security performance. Ensure compression is sufficiently high to maintain continuous contact of the glazing with the external bead. Users are advised to conduct their own tests in order to determine the suitability of the product for the...

Open the catalog to page 2

TN136_DS_GB_2020-06-05_WEB 2Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

TN136_DS_GB_2020-06-05_WEB
2Pages