Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
TN119_DS_GB_2020-05-20_WEB

TN119_DS_GB_2020-05-20_WEB
2Pages

Catalog excerpts

illbruckmaking it perfect. Property Foam Type Foam Density Adhesive Format Adhesive Type Tape Colour Application Temperature Service Temperature Recommended Compression Storage Shelf Life Description TN119 is a single sided polyethylene foam tape with a fixed film liner on the non-adhesive face. The product comprises a conformable 100% closed cell foam which is coated on one face with a high tack acrylic adhesive. Being closed cell, the product forms an excellent air seal under moderate compression. Packaging Thickness: 2, 3, 4, 5 & 6 mm Width: 6 to 1200 mm Any width within the range noted above can be cut subject to minimum order quantities. Stock sizes are available and our Customer Services team can supply details as well as advise on cut to order sizes, minimum order quantities and lead time. Results PE 33 kg/m3 Single Sided Acrylic Black +10°C to +30°C -10°C to +60°C 30% Store in shaded dry conditions between +5°C and +25°C 12 months when stored as recommended in original unopened packaging Preparation • Ensure bonding surfaces are free from irregularities and loose particles that may impair adhesion. • Dust, dirt and grease can be removed using AT115 Solvent Cleaner. Where substrates are sensitive to solvent attack, clean with warm water and allow to dry. • The substrate must always be dry before application of the tape. Application • Remove the closing tape at the start of the roll. Unwind the roll to expose the adhesive face, on the non adhesive face a film is added to aid easy unwinding of the roll, this is to be left in place. • Place the tape onto the flange and apply pressure to consolidate the bond. At corners either form tight butt joints or v-notch the tape to form a continuous seal. • For maximum air leakage performance use with LD410 or OS120. Flange Seal/Acoustic Tape Usage / Purpose TN119 is single sided closed cell polyethylene foam tape with a fixed film on the non-adhesive face. It is used to provide an airtight seal around flange joints in HVAC ductwork. TN119 is used within the modular construction market as a spacer tape between dissimilar metals or where absorption of vibration, shock or expansion/contraction are required. Key Benefits • A quick and easy way to achieve an airtight seal at ductwork connections, ideal for confined areas • 100% closed-cell PE foam provides an airtight seal even under minimal levels of compression • Excellent insulation properties against shock, vibration and movement • Provides a barrier to thermal bridging, galvanic corrosion and acoustic transmission

Open the catalog to page 1

illbruck Flange Seal/Acoustic Tape Please Note TN119 should not be used in conditions of continuous water immersion, below ground level, in areas subject to abrasion or in contact with bituminous surfaces. Users are advised to conduct their own tests in order to determine the suitability of the product for the particular application. Contact of the tape with solvents or corrosive chemicals should be avoided Health & Safety Precautions Safety data sheet must be read and understood before use. Technical Service Tremco CPG UK Limited has a team of experienced Technical Service Representatives...

Open the catalog to page 2

TN119_DS_GB_2020-05-20_WEB 2Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

TN119_DS_GB_2020-05-20_WEB
2Pages