Description TN113 is a self-adhesive foam tape. It is supplied in easy to use roll form. The product comprises a conformable 100% closed cell foam coated on one face with a high tack adhesive which is protected by siliconised paper liner. Being closed cell, the product forms an excellent air seal under moderate compression. When correctly applied it is capable of sealing ductwork to the Class C air leakage requirements of HVCA specification DW144. Packaging Thickness: 2,3,4,5,6,8,10 & 12 mm Width: 6 to 960 mm Any width within the range noted above can be cut subject to minimum order quantities. Stock sizes are available and our Customer Services team can supply details as well as advise on cut to order sizes, minimum order quantities and lead time. Technical Information Property Foam Type Foam Density Adhesive Format Single Sided Adhesive Type Tape Colour White & black Application Temperature Service Temperature Recommended Compression Store in shaded dry conditions between +5°C and +25°C Shelf Life 12 months when stored as recommended in original unopened packaging Preparation • Ensure bonding surfaces are free from irregularities and loose particles which may impair adhesion. • Dust, dirt and grease can be removed using AT115 Solvent Cleaner. Where substrates are sensitive to solvent attack, clean with warm water and allow to dry. • The substrate must always be dry before application of the tape. Application • Remove the closing tape at the start of the roll. Unwind the roll and remove the protective release paper to expose the adhesive face. • Place the tape onto the flange and apply pressure to consolidate the bond. At corners either form tight butt joints or V- notch the tape to form a continuous seal. • For maximum air leakage performance use with LD410 or OS120. TN113 Flange Seal Tape Usage / Purpose TN113 is a closed-cell, single sided PE foam tape used to provide an airtight seal around flange joints in HVAC ductwork. quick and easy way to achieve an airtight seal at ductwork connections, ideal for confined areas • 100% closed-cell PE foam provides an airtight seal even under minimal levels of compression • Meets the requirements of Building and Engineering Servi

illbruck Flange Seal Tape making it perfect. Please Note TN113 should not be used in conditions of continuous water immersion, below ground level, in areas subject to abrasion or in contact with bituminous surfaces. Users are advised to conduct their own tests in order to determine the suitability of the product for the particular application. Contact of the tape with solvents or corrosive chemicals should be avoided. Health & Safety Precautions Safety data sheet must be read and understood before use. Technical Service tremCO tremco illbruck has a team of experienced Technical Sales Representatives...