Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
TN075_DS_GB_2021-04-21_WEB

TN075_DS_GB_2021-04-21_WEB
2Pages

Catalog excerpts

Description TN075 is a hot melt LSE SBR adhesive applied unsupported on a release paper. Packaging Thickness: 0.4, 1 and 2 mm Width: 12, 19 and 25 mm. 38 mm (0.4 mm thick only) Any width within the range noted above can be cut subject to minimum order quantities. Stock size are available and our Customer Service team can supply details as well as advise on cut to order sizes, minimum order quantities and lead time. Technical Information Property Adhesive Format Double sided Adhesive Type SBR (Styrene Butadiene Rubber) Tape Colour Amber with white release paper carrier Application Temperature Service Temperature Store in shaded dry conditions between +10°C and +20°C Shelf Life 6 months when stored as recommended in original unopened packaging Preparation • Ensure bonding surfaces are free from irregularities and loose particles which may impair adhesion. • Dust, dirt and grease can be removed using AT115 Solvent Cleaner. Where substrates are sensitive to solvent attack, clean with warm water and allow to dry. • The substrate must always be dry before application of the tape. Application • The exposed adhesive face should be unwound gradually and carefully located onto surface of the substrate. Care must be taken to avoid compressing or stretching the tape during location - this could induce peeling forces and cause the tape to lift from the substrate. • Once the tape has been positioned then apply even pressure throughout the length using a roller, starting at the centre and moving to each end to avoid stretching. • With double sided tapes the protective release film is not removed until immediately prior to joint assembly. • Joints may be made by mitring corners or butting the tape ends tightly together. In all cases the tapes should be cleanly cut at slightly longer length than required to ensure compression of the jointing faces and formation of a tight joint. Usage / Purpose TN075 is designed to create a permanent and flexible bond in applications such as bonding aluminium skins to caravans and roof trailers. Also for lap jointing of plastics sheets and DPM‘s

Open the catalog to page 1

illbruckToffee Tape making it perfect. Please Note The adhesive is not UV resistant and should not be exposed to the sun, as degradation of adhesive will occur. Users are advised to conduct their own tests in order to determine the suitability of the product for the particular application. All slitting and length tolerances are to British Standards, but other tolerances are available by request. Health & Safety Precautions Safety data sheet must be read and understood before use. Technical Service Tremco CPG UK Limited has a team of experienced Technical Service Representatives who provide...

Open the catalog to page 2

TN075_DS_GB_2021-04-21_WEB 2Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

TN075_DS_GB_2021-04-21_WEB
2Pages