illbruckmaking it perfect. Description TN055 is a biaxially oriented polypropylene safety backing tape, coated with a special acrylic based pressure sensitive adhesive. It has high tack, high adhesion and excellent holding power. Colours Clear Also available with a plain liner and a grid pattern liner. Packaging Thickness: 90 g Widths: 6 mm to 1,280 mm. Technical Information Property Tape Thickness Adhesive Thickness Polypropylene Thickness Tensile Strength PSMA DST - 5 (5 mm x Machine Direction 100 mm test area) Tensile Strength PSMA DST - 5 (5 mm x Cross Direction 100 mm test area) Machine Direction 100 mm test area) Cross Direction 100 mm test area) TN055 Adhesion 20 Minutes Adhesion 24 Hours PSMA DST - 1 (20 minute & 24 hour 7.5 N/25 mm dwell) PSMA DST - 1 (20 minute & 24 hour 11.5 N/25 mm dwell) Polypropylene Safety Backing Film Shear Application Temperature Service Temperature Storage PSMA DST - 2 (1 kg) >100 hours +10°C to +23°C -40°C to +80°C Store in shaded dry conditions between +10°C and +20°C Shelf Life 24 months when stored as recommended in original unopened packaging Preparation • Ensure bonding surfaces are free from irregularities and loose particles which may impair adhesion. • Dust, dirt and grease can be removed using AT115 Solvent Cleaner. Where substrates are sensitive to solvent attack, clean with warm water and allow to dry. • The substrate must always be dry before application of the tape. Application • The exposed adhesive face should be unwound gradually and carefully located onto surface of the substrate. Care must be taken to avoid compressing or stretching the tape during location - this could induce peeling forces and cause the tape to lift from the substrate. • Once the tape has been positioned then apply even pressure throughout the length using a role, starting at the centre and moving to each end to avoid stretching. Usage / Purpose TN055 is suitable as a safety backing for mirrors. Key Benefits • Tested as B.S. 6206 class B & C for mirror safety backing • Approved Wintech certificate number R2830/08/1824 • Conforms to BSEN 12600 2B2 and 2C2 (clear only)

illbruck Polypropylene Safety Backing Film making it perfect. Please Note Users are advised to conduct their own tests in order to determine the suitability of the product for the particular application. All slitting and length tolerances are to British Standards, but other tolerances are available by request. Health & Safety Precautions Safety data sheet must be read and understood before use. Technical Service tremCO tremco illbruck has a team of experienced Technical Sales Representatives who provide assistance in the selection and specification of products. For more detailed information,...