Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
TN032_DS_GB_2019-10-07_WEB

TN032_DS_GB_2019-10-07_WEB
2Pages

Catalog excerpts

illbruckmaking it perfect. Description TN032 is a high performance aluminium foil. 35 micron bright finish, soft temper aluminium foil coated on one side, with pressure sensitive emulsion acrylic adhesive. Packaging Thickness: 35 micron Width: 6 to 1,220 mm Any size slit available from 6 mm upwards subject to minimum order quantities. Stock size are available and our Customer Service team can supply details as well as advise on cut to order sizes, minimum order quantities and lead time. Technical Information Property Composition Adhesive Format Adhesive Type Tape Colour Application Temperatu re Storage Shelf Life Results High performance aluminium foil. 35 micron Single sided Pressure sensitive emulsion acrylic adhesive Aluminium, bright finish +10°C Store in shaded dry conditions between +10°C and +20°C 24 months when stored as recommended in original unopened packaging Aluminium Foil Tape Preparation • Ensure bonding surfaces are free from irregularities and loose particles which may impair adhesion. • Dust, dirt and grease can be removed using AT115 Solvent Cleaner. Where substrates are sensitive to solvent attack, clean with warm water and allow to dry. • The substrate must always be dry before application of the tape. Application • The exposed adhesive face should be unwound gradually and carefully located onto surface of the substrate. Care must be taken to avoid compressing or stretching the tape during location - this could induce peeling forces and cause the tape to lift from the substrate. • Once the tape has been positioned then apply even pressure throughout the length using a role, starting at the centre and moving to each end to avoid stretching. • With double sided tapes the protective release film is not removed until immediately prior to joint assembly. • Joints may be made by mitring corners or butting the tape ends tightly together. In all cases the tapes should be cleanly cut at slightly longer length than required to ensure compression of the jointing faces and formation of a tight joint. Usage / Purpose TN032 gives a neat, attractive finish and provides protection and moisture vapour sealing on foil faced insulation materials, pipe insulation sections and metal ducting. Key Benefits • Neat, attractive finish • Protects pipe insulation and metal ducting

Open the catalog to page 1

illbruck Aluminium Foil Tape making it perfect. Please Note The adhesive is not UV resistant and should not be exposed to the sun, as degradation of adhesive will occur. Users are advised to conduct their own tests in order to determine the suitability of the product for the particular application. All slitting and length tolerances are to British Standards, but other tolerances are available by request. Health & Safety Precautions Safety data sheet must be read and understood before use. Technical Service tremCO tremco illbruck has a team of experienced Technical Sales Representatives who...

Open the catalog to page 2

TN032_DS_GB_2019-10-07_WEB 2Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

TN032_DS_GB_2019-10-07_WEB
2Pages