Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
SP510_DS_GB_2021-01-12_WEB (1)

SP510_DS_GB_2021-01-12_WEB (1)
3Pages

Catalog excerpts

Description SP510 is a one component, non-sagging sealant based on hybrid polymers. Colours White, anthracite, black and grey. Packaging 310 ml cartridge (12 per carton), 400 ml sausage (20 per carton), 600 ml sausage (20 per carton) Technical Information Property Test Method Specific Gravity Skin Formation Time Curing Speed Tensile Strength Application Temperature Service Temperature SP510 Low Mod Construction Sealant & Adhesive Store in shaded dry conditions between +5°C and +25°C. Shelf Life 12 months when stored as recommended in original unopened containers. Usage / Purpose Emission Certificates Regulation or Protocol SP510 fulfils class A+ according to the French VOC regulation of March and April 2011 (DEVL 1101903D and DEVL1104875A). SP510 fulfills the requirements of class EC 1 PLUS according to EMICODE (October 2017). SP510 passes the requirements of Indoor Air Comfort 6.0 of February 2017. Indoor Air Comfort GOLD® SP510 passes the requirements of Indoor Air Comfort Gold 6.0 of February 2017. BREEAM International SP510 is compliant with BREEAM International according to GN22 v2.3 (March 2018) (BREEAM Recognised Schemes for VOC Emissions from Building Products). SP510 passes the requirement of BREEAM-NOR New Construction v1.1 (May 2017). SP510 is compliant with LEED v4. SP510 is a low modulus sealant & adhesive, which is low slump even in warmer temperatures. It is an excellent adhesive and has superb application properties. It cures with air humidity, to form a tack-free surface and provides good resistance to light, ageing and weathering. SP510 is suitable for long term elastic sealing of window and door perimeter joints and movement joints between construction components. It can be used for indoor* and outdoor applications. It is compatible with metals and most construction materials. *excluding bathrooms/sanitary areas • Easy to tool • Good grab properties • Excellent adhesive • Free from isocyanates, silicone & solvents • Low slump •

Open the catalog to page 1

Necessary Tools • Use a good quality sealant gun. Smoothing tools (e.g. AA311), smoothing agent (eg AA301). Protective Equipment Use in well ventilated conditions and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Joint Design Considerations • Joint design to be in accordance with BS 6093. • For the purposes of joint width calculation to ISO 11600, the maximum movement capability of SP510 is 20%. • Minimum joint width should normally not be less than 5 mm. • Typical maximum joint width of 30 mm,...

Open the catalog to page 2

Low Mod Construction Sealant & Adhesive Joint Backing Polyethylene (PE) backing rod, (e.g. PR102) is recommended beneath the joint to ensure the sealant is only bonded to two surfaces. Application • Use a good quality sealant gun to expel the sealant consistently. Cut cartridge nozzle to desired aperture. • Apply between +5°C and +50°C. All beads should be tooled after application to ensure firm, full contact with the joint faces using smoothing tools (e.g. AA311), and smoothing agent (e.g. AA301) Cleaning Fresh, uncured sealant can be removed with AT115. Ensure surface is solvent resistant...

Open the catalog to page 3

SP510_DS_GB_2021-01-12_WEB (1) 3Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

SP510_DS_GB_2021-01-12_WEB (1)
3Pages