illbruckmaking it perfect. Description SP350 is a one component, non-sagging, elastic adhesive based on hybrid polymers. Colour White. Packaging 310 ml cartridges (12 per carton) Technical Information Property Specific Gravity Consistency Film Formation Time Cure Rate Volume Shrinkage Modulus at 25% Elongation Modulus at 100% Elongation Tensile Strength Elongation at Break Modulus at 100 % Elongation Tensile Strength Elongation at Break Shore A Hardness Application Temperature Service Temperature Storage Shelf Life Test Method Results +5°C up to +40°C -40°C up to + 90°C Store in shaded dry conditions between +5°C and +25°C. 12 months when stored as recommended in original unopened containers. Necessary Tools • This is a high viscosity material and a geared application gun such as AA854 or AA874 is recommended and a sharp knife to cut nozzle. Protective Equipment Use in well ventilated conditions and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Preparation • May be applied to damp substrates. • For optimum adhesion, surfaces should be clean, dry, sound and free of contamination. • Always carry out a test to confirm compatibility prior to use. • Roughen non-porous surfaces. • On materials such as glass, aluminium, ceramics, lacquered wood, epoxy and polyester no primer is required. For other materials, please contact tremco illbruck Technical Services. Fix & Seal High Tack Usage / Purpose SP350 is ideal for a vast range of interior & exterior applications and may be applied to damp substrates. Applications include: • Fixing aluminium and PVCu nosings and extrusions to concrete and wooden stairs. • Carpet grippers to most subfloors without using tacks or nails. • Most types of wall cladding, direct wall studding, internal wall surfaces or timber battens. Key Benefits • High initial grab and rapid development of final bond • Formulation is solvent free, very low odour, and chemically neutral • Instant grab can minimise the need for additional clamping or other mechanical supports • Good resistance to light, weather and ageing - suitable for internal and external applications

illbruck making it perfect. Fix & Seal High Tack + + AT150 Test in every case Primer Table Bricks, Concrete & Stone Natural Stone Plaster Aluminium Aluminium Anodised Aluminium Powder Coated Brass Copper Acrylic Glass PMMA - Sanitary Acrylic* Wood* Wood Primed* Wood Painted (acrylic)* Wood Stained Application • Ensure good contact between the joint surfaces before applying adhesive. Apply a bead of adhesive to one or both surfaces. For larger bond areas, apply parallel beads at approx. 100 mm spacing, so that after joining the parts an aerated gap remains between the beads. • Bring the two components...