illbruckmaking it perfect. Description SP050 is a multi-purpose sealant and adhesive based on tremco illbruck's advanced SP polymer formulation. Colour White, grey and black. Other colours available subject to minimum order quantity. Crystal clear version available, refer to SP030. Packaging 310 ml cartridges (12 per carton) illbruck Technical Information Property Composition Specific Gravity Consistency Shore A Hardness Shrinkage Modulus at 100% Elongation Tensile Strength Elastic Recovery Cure Time (at 20°C) Skinning Time Application Temperature Service Temperature Storage Shelf Life Results Advanced SP polymer formulation 1.6 0 mm , non-sagging 50 3% 1.7 N/mm2 2.1 N/mm2 > 50% ~ 2.5 mm/1st day ~ 17 minutes +5°C up to +40°C -40°C up to + 90°C Fix & Seal Universal Store in shaded dry conditions between +5°C and +25°C. 18 months when stored as recommended in original unopened containers. Necessary Tools • Standard cartridge skeleton gun and a sharp knife to cut nozzle. Protective Equipment Use in well ventilated conditions and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Preparation • May be applied to damp substrates. • For optimum adhesion, surfaces should be clean, dry, sound and free of contamination. • Always carry out a test to confirm compatibility prior to use. • Roughen non-porous surfaces. • On materials such as glass, aluminium, ceramics, lacquered wood, epoxy and polyester no primer is required. For other materials, please contact tremco illbruck Technical Services. Usage / Purpose SP050 provides a high strength flexible bond in a wide variety of construction and industrial applications. Typical uses include the bonding of skirting boards, battens, slats, door thresholds, acoustic panels (and similar sheet materials), etc. Key Benefits • A green alternative to traditional polyurethane adhesives - does not contain solvents or isocyanates and is very low odour • Excellent adhesion to a wide range of materials including metals, glass, PVC and concrete • Tack free in less than 30 minutes • Excellent weather resistance - suitable for internal and external applications • Can be overpainted once cured

Fix & Seal High Tack Application • Cut off end of thread with a sharp knife, avoiding damage to the thread. Trim the nozzle to the required diameter • Ensure good contact between the joint surfaces before applying adhesive. Apply a bead of adhesive to one or both surfaces. For larger bond areas, spread the adhesive immediately using a notched spreader • Bring the two components together immediately and clamp securely together for at least 30 minutes until sufficient bond strength has developed. Sufficient working strength will normally develop after 30 minutes. Width Depth Cleaning Remove excess...