illbruckmaking it perfect. Description SP045 is a multi-purpose adhesive based on the illbruck advanced SP polymer formulation. Colour White Packaging 400 ml sausages (12 per carton) Technical Information Characteristic Density Reaction to Fire Consistency Tack Free Time Cure Rate Volume Shrinkage Shore A hardness Tensile Strength at 100% Elongation Tensile Strength at Break Elongation at Break Shear Strength Tear Resistance Application Temperature Service Temperature Storage Shelf Life Standard Classification EN 13501 part 1 (2007) Class E EN 7390 20 mm profile 0 mm, non-sagging +5°C to +40 °C -40°C to + 90°C Store in shaded, dry conditions between +5°C and +25°C 12 months when stored as recommended in original, unopened containers Multi-Purpose Adhesive Surface Preparation • For optimum adhesion, surfaces to be bonded should be clean, dry, dust-free and free of grease. • To remove grease or dust, glazed tiles, metal surfaces, glass can be cleaned with AA200 Cleaner. • On sensitive substrates like powder-coated surfaces, for cleaning the milder AA115 can be used. • Always carry out a test to confirm compatibility prior to use. • Refer to the adhesion table below for primer recommendations. For other materials, please contact CPG UKTechnical Services. Usage / Purpose SP045 is an easy to apply adhesive for use where a quick initial fix and a lasting strong flexible bond is required. SP045's versatility extends to a wide range of construction fixing and mounting applications such as bonding skirtings, architraves and lightweight coving. Application • For bonding on substrates where no primer is necessary (see table) SP045 can be applied directly out of the sausage using a manual or pneumatic gun. • When applying onto primer, ensure the primer has dried sufficiently in accordance with the relevant data sheet. • Ensure the surface is tooled within the tack free time and to get the best finish do not overuse tooling aids. Key Benefits • Good cohesive strength and cure speed, adhesive bond occurs quickly and remains strong and flexible after curing • Wide adhesion spectrum, bonds to common construction materials, often without the need for primer • Easy to extrude with no sag for a controlled application with less adhesive waste • Good UV resistance • Low VOC formulation, isocyanate and solvent free with low odour

Acrylic glass (PMMA) Aluminium Brick Concrete Electrically anodized aluminium Glass Hot dip galvanized steel Iron Plaster Polyamide Polycarbonate Polyester (reinforced with glass fibers) Polypropylene Polystyrene Powder coating Hard PVC Soft PVC Sanitary acrylic (coloured) Stainless steel Glazed Ceramic Tiles (front) Glazed Ceramic Tiles (back) Wood Test for every single case + + + + + AT140 + The above recommendations refer to applications with normal weathering load. Due to the numerous possible variations of substrates they only can be used as a guideline: + no primer necessary +, . . . tests...