Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
SP030_DS_GB_2019-12-20_WEB (1)

SP030_DS_GB_2019-12-20_WEB (1)
2Pages

Catalog excerpts

illbruckmaking it perfect. Description SP030 is a transparent, fast-curing adhesive-sealant based on tremco illbruck's SP polymer formulation. Colour Crystal clear Packaging 310 ml cartridge (12 per carton) Technical Information Characteristic Composition Specific Gravity Consistency Shore A Hardness Shrinkage Modulus at 100 % Elongation Elongation at Break Elastic Recovery Permitted Total Deformation Cure Time (at 20°C) Skinning Time Application Temperature Service Temperature Storage Shelf Life Classification Advanced SP polymer formulation 1.04 0 mm, non-sagging Fix & Seal Crystal Store in shaded, dry conditions between +5°C and +25°C 12 months when stored as recommended in original, unopened containers Necessary Tools • Standard cartridge skeleton gun and a sharp knife to cut nozzle. Protective Equipment Use in well ventilated conditions and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Preparation • Always carry out a test to confirm compatibility prior to use. • Surfaces to be bonded must be clean, dry, dust-proof and degreased. • Roughen non-porous surfaces. • On materials such as glass, aluminum, ceramics, lacquered wood, PVC, epoxy and polyester, tests have shown that primer may be needed, but not always. For other materials, please contact tremco illbruck Technical Services. Usage / Purpose SP030 cures rapidly to provide a flexible, crystal clear seal. The transparent properties of SP030 make it ideal for use in the sealing/bonding of glass elements in a wide range of interior applications where a transparent bond is required. Typical uses include bonding glass panes to aluminium or anodised frames (construction of display cases, retail units, glass lifts etc). This adhesive is compatible with metals and most materials used in construction work. Key Benefits • A crystal clear polymer sealant ideal for transparent bonding • Advanced SP polymer formulation - a green alternative to traditional PU adhesives • Does not contain solvents or isocyanates - very low odour • Excellent adhesion to a wide range of materials including metals, glass, PVC and concrete • Rapid skinning - tack free in approx 10 minutes

Open the catalog to page 1

Fix & Seal Crystal Application • Cut off end of thread with a sharp knife, avoiding damage to the thread. Trim the nozzle to the required diameter. • Ensure good contact between the joint surfaces before applying adhesive. • Apply a bead of adhesive to one or both surfaces. • For larger bond areas, spread the adhesive immediately using a notched spreader. • Bring the two components together immediately and hold together for at least 5 minutes until sufficient bond strength has developed. Sufficient working strength will normally develop after 5 -10 minutes. Coverage Width x Depth (mm)...

Open the catalog to page 2

SP030_DS_GB_2019-12-20_WEB (1) 2Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

SP030_DS_GB_2019-12-20_WEB (1)
2Pages