illbruckmaking it perfect. Packaging & Colours Description SP025 Fire Membrane Adhesive is chemically neutral and low odour during and after curing. When tested to EN13501-1 with ME010 Fagade UV & Fire Membrane, the system achieves Class B-s1, d0 (Reaction to fire). On full curing, the product is permanently elastic but with a high mechanical strength. SP025 shows a good resistance to UV, weather and ageing and is free from isocyanates and silicone. Material Mono-component, non-sagging, elastic adhesive based on hybrid-polymers. Necessary Tools • Sausage application gun (such as AA956), smoothing tools such as AA311, and AA301 Smoothing Agent for sealant applications. Protective Equipment Use in well ventilated conditions and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Fire Membrane Adhesive Usage / Purpose Suitable for bonding and sealing in construction applications. Fagade sealant for external and internal use according to DIN EN 15651-1, Class 20HM. Tested with ME010 Fagade UV & Fire membrane to EN 13501-1: Class B-s1, d0. Suitable for bonding illbruck intelligent membrane range (NOT EPDM). Key Benefits • Tested with ME010 to Class B-s1, d0 to EN13501-1 • Very low-emission EC1 Plus • Excellent bonding even with slightly damp surfaces • Fast curing single component system (film formation time approx. 25 minutes) • UV and rain resistant, isocyanate and silicone-free, odourless

The above recommendations can only be used as an indication of performance due to the variation in substrates. + no primer necessary +, tests have shown that sometimes primer is required, depending on loading, variation in substrate. Testing using the specific substates and conditions is recommended. - not recommended for this substrate. This generally applies to eg polyethylene, silicone, butyl rubber, neoprene, EPDM, bituminous or tar containing materials, and natural stone. Surface Preparation • The surfaces must be clean, load-bearing, dry to slightly moist, frost, dust and grease-free. •...

Fire Membrane Adhesive illbruck making it perfect. Technical Service Tremco CPG UK Limited has a team of experienced Technical Service Representatives who provide assistance in the selection and specification of products. For more detailed information, service and advice, please call Customer Service on 01942 251400. Guarantee / Warranty Tremco CPG UK Limited products are manufactured to rigid standards of quality. Any product which has been applied (a) in accordance with Tremco CPG UK Limited written instructions and (b) in any application recommended by Tremco CPG UK Limited, but which is proved...