Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
PU700_DS_GB_2019-01-23_WEB

PU700_DS_GB_2019-01-23_WEB
2Pages

Catalog excerpts

illbruckmaking it perfect. Description PU700 is a rapid curing polyurethane foam adhesive which can be applied by gun or straw. Colour Beige Packaging 750 ml canisters (12 per carton) Technical Information Characteristic Composition Conformance Fire Class Open Time Tack Free Time Classification Polyurethane Foam D4 Class E B3 8 minutes 8 minutes Loading Time 24 hours Tensile Strength FEICA TM 1018 10,500 kPa Service Temperature Short Term: -40°C to +130°C Long Term: -40°C to +90°C Shelf Life Store in shaded, dry conditions between +10°C and +25°C Store canisters upright 12 months when stored as recommended in original, unopened containers Multi-Use Construction Adhesive *Application temperature of -5°C applies only if the surface is dry Protective Equipment USE IN WELL VENTILATED CONDITIONS and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Preparation • IMPORTANT At least one surface should be porous. • Always carry out a test to confirm compatibility prior to use. • Protect floor coverings with paper or a plastic film. • The surfaces must be dry, solid, stable and capable of carrying the load of the panels to be installed. • Remove all loose particles, dust and grease. • A speedier cure can be attained by moistening the substrates if needed. Application • Shake the canister vigorously at least 20 times. Remove the protective cap and screw onto the illbruck PU foam gun or straw. • Apply a bead of PU700 along the horizontal and vertical sections to be bonded. Keep the end of the nozzle just off the surface. • For best results always work with the canister in a vertical position and keep the valve pointed downwards. Usage / Purpose PU700 is an innovative high-strength solution for bonding a wide variety of applications. Key Benefits • An innovative solution for bonding bricks / blocks that can replace traditional mortar • High performance wood and joinery adhesive • Ideal for bonding a wide range of construction materials including steel and foam • Rapid curing - joint can be handled / maneuvered within 10 minutes, and cures fully within 24 hours • Easy to use: no mixing, no water, no dust, no specialist tools or equipment required • Suitable for indoor or outdoor use • Excellent long-term resistance to seawater, limewater, dilute acids and caustic solutions

Open the catalog to page 1

Multi-Use Construction Adhesive Coverage A 750 ml canister will deliver up to 160 linear metres of adhesive (based on a 10 mm wide bead). Cleaning Remove excess foam immediately with illbruck PU foam cleaner or acetone. Ensure surface is solvent resistant before cleaning. Cured foam can only be removed mechanically. Health & Safety Precautions Safety data sheet must be read and understood before use. Extremely flammable - keep away from open flames and other ignition sources. Please Note Not suitable for large scale brick bonding, as a replacement for conventional mortar. Technical Service...

Open the catalog to page 2

PU700_DS_GB_2019-01-23_WEB 2Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

PU700_DS_GB_2019-01-23_WEB
2Pages