Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
PU012_DS_GB_2017-06-16_WEB

PU012_DS_GB_2017-06-16_WEB
2Pages

Catalog excerpts

illbruckmaking it perfect. Description PU012 is a low viscosity, liquid polyurethane wood adhesive. Colour Amber Packaging 750 g bottle (12 per carton) Technical Information Characteristic Standard Density Viscosity Solids Content Conformance Working Time Pressing Time Pressing Pressure Flash Point Coverage Service Temperatu re Application Temperature Storage Shelf Life 1.14 g/cm3 Liquid Approx. 100% EN204: D4 Approx. 20 minutes 12 hours 10 - 30 kg/cm2 > +110°C 100 - 200 g/m2 depending on the porosity of the substrate -30°C to +100°C +5°C to +30°C Store in shaded, dry conditions between +5°C and +25°C. Protect from frost. 12 months when stored as recommended in original unopened containers Necessary Tools • Suitable trowel, adhesive spreader or roller. Protective Equipment USE IN WELL VENTILATED CONDITIONS and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Preparation • Always carry out a test to confirm compatibility prior to use. • All surfaces to be bonded must be close fitting, degreased, clean, and free from dust and any other contamination. • Dampening the surfaces to be bonded with a moist cloth or spray can increase the rate of cure. • Metals should be stored at room temperature prior to bonding to avoid chilling the glue line. • Most coated and pre-finished ready for painting metals are well suited for bonding. Some grades of aluminium galvanised steel and plastics can be difficult to bond and may require the use of a primer. PU012Wood Adhesive Usage / Purpose PU012 is a low viscosity PU adhesive designed for rapidly bonding wood to wood. It is suitable for full water immersion, even in seawater. It is ideal for the manufacture and lamination of composite panels and will bond many different types of foam and insulation materials to a wide variety of rigid and flexible facing panel types. Typical uses are in the manufacture and erection of cold stores, caravans, mobile homes, offices and insulated building units. Key Benefits • Waterproof adhesive suitable for external use - meets the requirements of EN 204 (D4) • Forms an exceptionally high bond strength to most building materials, even damp substrates • Gap filling action achieves a high strength bond with irregular or uneven substrates • Rapid curing and outstanding bond strength without the need for priming or surface treatment

Open the catalog to page 1

illbruck Wood Adhesive Application • Apply using a trowel, notched scraper or hand roller to one of the surfaces to be bonded along the glue line. The amount applied will vary according to the porosity/ smoothness of the substrates and the means of application but would normally be in the range of 80 - 120 ml per m2. • Once the adhesive has been applied, a light misting of water should be applied. About 5 - 75% of water by weight based on the adhesive coating weight is ideal. Avoid excessive amounts of water. • Assembly should then take place with the application of pressure/clamping as...

Open the catalog to page 2

PU012_DS_GB_2017-06-16_WEB 2Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

PU012_DS_GB_2017-06-16_WEB
2Pages