illbruckmaking it perfect. Description PU010 is a rapid curing gun grade polyurethane, collapsing foam adhesive. Colour Green Packaging 750 ml canisters (12 per carton) Technical Information Characteristic Standard Composition Polyurethane Adhesive Tack Free Time EN 17333-3 10 minutes Loading Time Tensile Strength on 8 mm wide joint Thermal Conductivity 36 mW/m.K Service Temperature Storage Short term:-40°C to +130°C Long term: -40°C to +90°C Store in shaded, dry conditions between +10°C and +30°C Store canisters upright PU010 Panel Adhesive Shelf Life 24 months when stored as recommended in original, unopened containers Protective Equipment USE IN WELL VENTILATED CONDITIONS and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Preparation • Always carry out a test to confirm compatibility prior to use. • Protect floor coverings with paper or a plastic film. • The surfaces must be dry, solid, stable and capable of carrying the load of the panels to be installed. • Remove all loose particles, dust and grease. • A speedier cure can be attained by moistening the substrates if needed. Application • Shake the canister vigorously at least 20 times. Remove the protective cap and screw onto the illbruck PU foam gun. • For internal applications: Starting at the middle of the panel, apply a bead of PU010 adhesive across the full width of the board or panel and repeat every 300 mm. • For external applications (EIFS): Apply a bead of PU010 Panel Adhesive around the perimeter of the surface to be bonded. Then across the full width of the board or panel at 300 mm intervals. • For best results always work with the canister in a vertical position and keep the valve pointed downwards. • Move the panel into place and press firmly to ensure a good contact. Hold in position for 2-3 minutes, heavier panels may require additional support during curing. Usage / Purpose PU010 is a rapid curing gun grade polyurethane adhesive. It is ideal for the rapid installation of plasterboard, insulation or acoustic panels, EIFS, roof decking and similar sheet materials. PU010 is compatible with many common substrates including masonry, concrete, timber and metal. Key Benefits • An easy to use alternative to mortars and dry wall adhesives • Ideal for bonding plasterboard, insulation and EIFS panels • Expands to fill gaps, cavities and uneven surfaces • Compatible with a wide range of common building substrates

illbruck Panel Adhesive making it perfect. Coverage A single canister of PU010 is sufficient to bond approximately 5 m2 of panel. Cleaning Remove excess adhesive immediately with AA290 PU Foam Cleaner. Ensure surface is solvent resistant before cleaning. Cured adhesive can only be removed mechanically. Health & Safety Precautions Safety data sheet must be read and understood before use. Technical Service Tremco CPG UK Limited has a team of experiencedTechnical Sales Representatives who provide assistance in the selection and specification of products. For more detailed information, service and...