Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
OT301_DS_GB_2019-05-03_WEB

OT301_DS_GB_2019-05-03_WEB
2Pages

Catalog excerpts

making it perfect. Description OT301 is a dispersion based on acrylic copolymers and ethanol. Colour Green Packaging Item N° Content Coverage Content Bead Coverage Technical Information Property Composition Characteristics System Cu ring Time Density Application Temperature Service Temperature Storage Shelf Life Result Dispersion based on acrylic copolymers and ethanol - free from plasticisers, halogens Durable, elastic Physically drying 2 - 3 days depending on substrate, humidity and membrane Approx. 1.2 g/cm3 -10°C to + 50°C permanent: -20°C to +80°C Store in dry shaded conditions between -20°C and +25°C 12 months when stored as recommended in original unopened packaging OT301 Endurance Adhesive Necessary Tools • Installation requires the use of an application gun and cutter or scraper. Protective Equipment USE IN WELL VENTILATED CONDITIONS and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Application • Surfaces must be dry and free of oil, grease, dust and other anti-adhesive components. Mineral substrates (such as plaster or concrete), may be slightly damp. • Bonding to frozen surfaces is not possible. • Substrates must offer sufficient load-bearing capacity. It may be necessary to use a mechanical support (such as pressure lath) on crumbling substrates. • Joints are possible on mineral substrates, on planed and painted wood, high density plastic and non-rusting metal (e.g. pipes, windows etc.), and hardboard (chipboard, OSB, veneer plywood and MDF board). Usage / Purpose Use OT301 for creating airtight joints between illbruck vapour barrier and structural elements, airtightness membranes, wall lining membranes of all kinds and for bonding wind-tight joints between sub-roof and roof-lining membranes. A permanent bond is achieved on all illbruck membranes, PE, PA, PP and aluminium foil used to create an airtight seal. Key Benefits • Very high, permanent adhesion • Quick drying • No pressure lath is required on loadbearing substrates • Very elastic, permanently flexible • Can be applied in low temperatures and suitable for permanent use in a very wide temperature range • Can be stored in very low temperatures

Open the catalog to page 1

Endurance Adhesive illbruck making it perfect. • The user is responsible for checking the suitability of the substrate. Adhesion tests are recommended. Some surfaces may require priming with ME904 primer. If in doubt, please contact tremco illbruck Technical Services. Note OT301 is not suitable for external applications where it is likely to come into contact with liquid water. Sustained contact with water may result in re-emulsification and loss of adhesion. Health & Safety Precautions Safety data sheet must be read and understood before use. Flammable - keep away from open flames and...

Open the catalog to page 2

OT301_DS_GB_2019-05-03_WEB 2Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

OT301_DS_GB_2019-05-03_WEB
2Pages