illbruckmaking it perfect. Description OT015 is a paste adhesive, made from a blend of synthetic rubber and resin. Colour Black Packaging 600 ml sausages (12 per carton) Technical Information Property Composition System Specific Gravity Cure Rate (at 20°C) Dry Tack Time (at 20°C) Peel Strength Consumption Application Temperature Service Temperature Storage Shelf Life Result A blend of synthetic rubber and resin Solvent evaporation 1.1 2 - 4 mm /24 hours Approx. 10 minutes > 75 N /25 mm Approx. 200 - 300 g/m2 +5°C to +35°C Long Periods: -20°C to +60°C Short Periods: -20°C to +80°C Store in dry shaded conditions between +5 °C and +30 °C. 12 months when stored as recommended in original unopened packaging. OT015 Necessary Tools • Installation requires the use of an application gun and cutter or scraper. Protective Equipment USE IN WELL VENTILATED CONDITIONS and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Preparation • Always carry out a test to confirm compatibility prior to use. • All surfaces must be dry, clean and sound, free from dirt, grease and other contamination. • It is recommended to degrease the substrate (and membrane if necessary) by using isopropanol. • Porous substrates should be sealed by priming with CT113, or bonded directly using CT113. Application • For bonding to the window frame, apply a minimum 10 mm dia bead to align 15 mm inside the edge of the membrane and after locating against the frame, consolidate using a seam roller taking care that the adhesive does not exude out onto the frame. The compressed adhesive bead should now be approx 20-30 x 2-3 mm. If it is not possible to apply a consolidated bead of minimum 20 mm, please consult tremco illbruck technical department. High Tack Membrane Adhesive Usage / Purpose OT015 is a specially formulated high tack adhesive which is used for bonding ME220 Elastomeric EPDM Membrane to itself and to typical construction substrates such as aluminium, metal, zinc plated metal, wood, PVC-U, and other non-porous materials as well as cement particle board and concrete. The resultant connection provides excellent resistance to ageing, temperature changes and is waterproof. Key Benefits • Ideal for bonding of ME220 EPDM membranes in facade installations • Cured adhesive has excellent resistance to weathering and the ageing effects of UV exposure • Adhesive accommodates a wide fluctuation in temperature from -20°C up to +60°C (+80°C for short periods) • Easy, clean, fast and precise application

illbruck making it perfect. • For bonding to the construction substrate, apply a 10 mm dia bead to align 15mm inside the edge of the membrane and after locating against the substrate, consolidate using a seam roller. The compressed adhesive bead should now be approx 20 - 30 x 2-3 mm. • Further adhesive application may be necessary depending on size of membrane and actual detail. • For ensuring robust air and weather tight seals at the membrane corner joints, illbruck ME241 EPDM Corners should be used. The ME241 Corners can be applied before or after the membrane. If however, the membrane is supplied...