Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
MT480_DS_GB_2018-12-12_WEB

MT480_DS_GB_2018-12-12_WEB
2Pages

Catalog excerpts

illbruckmaking it perfect. High Grip Solvent Free Description MT480 is a water-based, gap filling grab adhesive. It offers the same gap filling and bonding performance, but without the issues surrounding solvent-based adhesives. It is an ideal choice for the professional user when local regulations do not permit the use of solvent-based systems and it is a sensible adhesive to select for use in confined areas where ventilation is poor and solvent based adhesives could be considered hazardous. Applications include: fixing aluminium and PVCu nosings and extrusions to concrete and wooden stairs; carpet grippers to most subfloors without using tacks or nails; most types of wall cladding, direct wall studding, internal wall surfaces or timber battens; direct fixing of battens, architrave, etc., to walls without other fixings; and fixing floor boarding and skirting boards. MT480 has excellent adhesion to brick, concrete, blockwork, wood, plywood, chipboard, hardboard, plasterboard, polystyrene, laminated plastics metals and ceramics. Colour White Packaging 380 ml cartridges (12 per carton) Technical Information Characteristic Composition System Specific Gravity Final Adhesion Strength Application Temperature Service Temperature Storage Shelf Life Necessary Tools • Standard cartridge skeleton gun and a sharp knife to cut nozzle. Protective Equipment Use in well ventilated conditions and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Preparation • All surfaces must be clean and free from grease, contamination dust and other loose material. • Surfaces may be damp but not running wet. • It may be necessary to prime dusty or porous substrates with WD110 diluted 5:1 with water and allow to dry thoroughly before using the adhesive. • Abrading the bond surfaces will assist final bond strength. Results (Typical Values) Water based emulsion Evaporative cross linking 1.6 7 days +5°C to +40°C -40°C to +100°C Store in dry shaded conditions between +12°C and +25°C. Do not allow to freeze. 12 months when stored as recommended in original, unopened containers Usage / Purpose MT480 has been developed to provide a water-based alternative to conventional grab adhesives. It is suitable for a wide range of construction applications and bonds to most typical construction materials. Key Benefits • Water based construction adhesive with high initial grab and ultimate bond strength • Contains no organic solvents • Gap filling formulation forms a strong bond even with irregular or uneven substrates • Bonds most typical construction material - ideal for expanded and extruded polystyrene

Open the catalog to page 1

High Grip Solvent Free illbruck making it perfect. Application • Cut off the end of the tip of the cartridge to expose the adhesive. Screw on the nozzle then cut back the nozzle to the required size. Apply using a sealant applicator gun. • For panelling and other large areas, apply stripes at regular intervals. Apply the adhesive to one of the bond surfaces; bring both surfaces together moving slightly and applying even pressure to bed down. • Finally, increase the pressure over the joint surface to maximise the areas of contact. The use of temporary fixing/ support may be needed until...

Open the catalog to page 2

MT480_DS_GB_2018-12-12_WEB 2Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

MT480_DS_GB_2018-12-12_WEB
2Pages