illbruckmaking it perfect. Description ME904 is a solvent free, acrylic copolymer primer. Colour White on application, transparent after drying Packaging 1 litre tins. Technical Information Property Material Drying Time Consumption per Litre Storage Result Based on polyvinyl acetate - water based system (dispersion) 10 to 40 minutes (depending on porosity/ relative humidity) Approximately 6-8 m2 (depending on surface) Store in shaded dry conditions between +5°C and 30°C Shelf Life 24 months when stored as recommended in original unopened containers Protective Equipment USE IN WELL VENTILATED CONDITIONS and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Application • The surface should be dry, and free from dust and grease. • Remove concrete and cement residues. • Protect adjacent surfaces with masking tape. • Apply evenly and carefully onto the surface using a brush. • After use, ensure the tin is firmly closed. • Adhesion and drying time is dependent on ambient temperature and humidity. • If unsure, carry out a preliminary adhesion test. Cleaning Splashes should be removed with water. Health & Safety Precautions Safety data sheet must be read and understood before use. Adhesive Tape Primer Usage / Purpose ME904 is used for the pre-treatment of building substrates, e.g. cement particle board, masonry, timber, etc., when using illbruck building protection tapes, particularly for bonding to damp substrates. Key Benefits • Optimises adhesion • Stabilisation of the surface • Short drying time • Solvent free • Allows use of illbruck building protection tapes in damp conditions Technical Service Tremco CPG UK Limited has a team of experienced Technical Sales Representatives who provide assistance in the selection and specification of products. For more detailed information, service and advice, please call Customer Services on 01942 251400. Guarantee / Warranty Tremco CPG UK Limited products are manufactured to rigid standards of quality. Any product which has been applied (a) in accordance withTremco CPG UK Limited written instructions and (b) in any application recommended byTremco CPG UK Limited, but which is proved to be defective, will be replaced free of charge. No liability can be accepted for the information provided in this leaflet although it is published in good faith and believed to be correct. Tremco CPG UK Limited reserves the right to alter product specifications without prior notice, in line with Company policy of continuous development and improvement. Tremco CPG UK Limited Coupland Road Hindley Green, WIgan WN2 4HT United Kingdom T: +44 1942 251400 F: +44 1942 251410 [email protected] www.cpg-europe.com