illbruckmaking it perfect. Description ME315 is a special tape with solvent free modified acrylic dispersion adhesive. Colour Black Packaging Item No. Roll Length Roll Width Rolls/Box Technical Information Property Test Method Result UV stabilised membrane Material solvent free acrylic dispersion Thickness 0.3 mm (without liner) Ageing Resistance Very good Total Protection Tape Weather Resistance DIN EN 1027 600 Pa Plasticiser Resistance Very good Compatibility with Common Building Given Service Temperature Application Temperature Storage Store in shaded, dry conditions 1 year when stored as Shelf Life recommended in original unopened packaging * depending on ambient temperature and relative humidity ** depending on ambient temperature, the use of appropriate illbruck primer is recommended. Store all primers prior to use at minimum 10°C. Application • Surfaces must be dry and free of oil, grease, dust and other anti-adhesive components. Bonding to frozen surfaces is not possible. • The substrate must offer sufficient load-bearing capacity. On porous or damp substrates or at low temperatures, the use of illbruck Primer (ME901, ME902, ME904 or AT140) is recommended. AT140 is the recommended option for bonding ME315 over joints which have been sealed with silicone based sealants. • Detach the release paper and place the tape centrally over the joint (e.g. edge of overlapping membrane, or across a panel joint) so that the minimum coverage onto each substrate is 20 mm. Usage / Purpose Single-sided adhesive tape for interior and exterior use, providing a high performing air and weather tight seal. Suitable for a wide variety of applications including sealing of sheathing boards, slab edge details and the durable bonding of illbruck vapour barrier and breather membranes. A permanent bond is achieved on all illbruck indoor and outdoor building protection membranes. Key Benefits • Fully compatible with all illbruck building protection products • Interior and exterior use • Quick and easy application • Highly UV resistant • Can be used within partially open fagades • Weather resistant • Highly moisture resistant adhesive • Excellent adhesive bond strength to most common substrates • Very soft to touch

• Gradually peel off the release paper and adhere the tape whilst keeping it tension-free and wrinkle-free to the substrate. • To consolidate the bond, apply firm pressure manually. Use of a seam roller will further improve the adhesion in most applications. • Do not use the tape below a 10° roof pitch. Health & Safety Precautions Safety data sheet must be read and understood before use. Technical Service Tremco CPG UK Limited has a team of experienced Technical Sales Representatives who provide assistance in the selection and specification of products. For more detailed information, service...