Description ME010 is a water and air tight but vapour permeable polyester based breather membrane in two basic formats highly suited for use as a monolithic breather membrane. It can be used for sealing around window, door, and curtain wall perimeter tolerance joints (slit into a range of widths), or for sealing sheathing board to board or sheathing board to structure joints (supplied on 1,500 mm x 50 m rolls or in a smaller range of widths). ME010 complies with the reaction to fire classification Class B-s3, d0 according to EN13501-1. When used as a monolithic breather membrane, linear gap or window perimeter membrane seal, in conjunction with SP025 Fire Membrane Adhesive, the system achieves Class B-s1, d0 (better than the requirement). Colour Black Packaging Roll Width* Roll Length *Other widths are available upon request - please consult tremco illbruck Customer Services with your requirements and for confirmation of lead times. Technical Information Property Standards Result Class B-s1, d0, fixed to mineral wool or sheathing board, (min. A2-s1, d0), including SP025 Adhesive Fagade UV & Fire Membrane Usage / Purpose This high performance breather membrane can be directly laid on sheathing board or thermal insulation behind partially or fully open rain screen fagades or curtain walling. ME010 is a highly vapour open, watertight, polyester-based breather membrane, with Class B-s1, d0 to EN13501-1 -including adhesive, tested by MPA Hannover. Suitable for full fagade or window perimeter sealing applications. Key Benefits • Permanently UV-resistant • Class B-s1, d0 to EN13501-1 - fixed to Class A2-s1, d0 mineral wool insulation or sheathing board. Tested with SP025 adhesive as a system • High range of in-service temperature resistance • Highly vapour-open • Non-branded, plain black finish -suitable for visible applications • Airtight and weather-tight • Available with self-adhesive strip

Vapour Difusion -Equivalent Air Layer EN ISO 12572 Flexural Behaviour in Cold Conditions Storage Shelf Life Store in shaded, dry conditions and avoid stacking pallets 1 year when stored as recommended in original unopened packaging Intended Scope of Application • ME010 can be applied to the full fagade or around the perimeter of windows and doors which project forward from the backing wall in a built-up wall construction such as SFS or timber framed and sheathed walls. • When using ME010 for both applications, apply to the window perimeter first, followed by the full fagade in order to provide...

Application - For Full Facade Protection • For connecting to previously applied ME010 applied as window perimeter seal, bond with SP025 or ME315 Total Protection Tape then continue on the fagade as below. • Apply the membrane horizontally, starting from the bottom to ensure natural water run-off, fixing each sheet with staples or SP025 adhesive* to the sheathing board or other substrate. • When applying the membrane from the roll, to achieve maximum UV stability, and to ensure a good bond (if applicable) the outer (fleece) face of the membrane must be orientated towards the structure, and the...