Description FS125 is a one-part, neutral curing, low modulus, low odour silicone sealant suitable for perimeter joint sealing applications with high movement capability. It has excellent primerless adhesion to multiple surfaces including masonry, brick, aluminium, PVC-U, polycarbonate, polyacrylate, wood, painted wood, glass and glazed surfaces. Colours White, Grey Anthracite and Signal Black Packaging 380 ml cartridge (25 per carton) Technical Information Characteristic neutral silicone EN 15651-1 class 25 LM CC EN 15651-2 class 25 LM CC Composition Classification Reaction to Fire Specific Gravity Consistency Shore A Hardness Skin Forming Time Cure Rate Volume Shrinkage Tensile Strength Modulus at 100% Elongation Elongation at Break Movement Capability Elastic Recovery Application Temperature Service Temperature Range (Short Term) Storage Shelf Life 0 mm, non-sagging ~ 24 ~ 20 - 30 minutes ~ 1 - 2 mm /1st day ~ 6% ~ 0.5 N/mm² Premium Frame & Façade Silicone Store in shaded dry conditions between +5°C and +25°C 12 months when stored as recommended in original unopened containers Necessary Tools • Cartridge gun and sharp knife. Protective Equipment Use in well ventilated conditions and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Priming • FS125 has excellent primerless adhesion to many typical construction materials. For special situations, or if in doubt, please contact CPG UK Technical Services Department to discuss your requirements. Usage / Purpose FS125 is ideal for use in expansion & curtain wall joints, perimeter joints around windows or doors, panel joints between most common substrates, heel and toe beads, polycarbonate glazing and other general joint sealing applications. • Meets the requirements of EN ISO 11600 G&F 25LM • High movement capability • Long-term resistance to weathering, ageing and extra UV protection • Low modulus formulation ensures minimum stress at joint faces • Neutral cure: low odour • Modern colour range in low sheen finish • Easy to to

Adhesion Table Bricks, Concrete & Stone Brick Concrete Natural Stone Plaster Aluminium Aluminium Anodised Aluminium Powder Coated Brass Copper Galvaniised Steel Iron Stainless Steel ABS Acrylic Glass PMMA Polyamide* Polycarbonate* Polyester GRP PVC Rigid PVC Soft Sheet/Film Sanitary Acrylic Wood* Wood Primed* Wood Painted (acrylic)* Wood Stained Glazed Tiles Tiles Reverse Side Unglazed Tiles +, AT101 +, AT101 AT101 + +, AT120 +, Test + + +, AT105, AT120 +, AT105, AT120 +, AT105, AT120 + +, AT120 +, AT120 +, AT120 +, AT120 + +, AT105, AT120 +, AT120 +, AT120 +, Test +, AT120 +, AT120 +, Test +...

illbruck Premium Frame & Fagade Silicone Please Note Not suitable for some substrates such as neoprene, butyl rubber, EPDM, bituminous or tar containing surfaces. Contact with bituminous or tar containing surfaces can lead to discolouration and failing adhesion. Not suitable for trafficable joints or areas subject to abrasion. Not suitable for over painting. For safe sealing on natural stone use FA870/ FA880. On other sensitive substrates test first. Health & Safety Precautions Safety data sheet must be read and understood before use. Technical Service Tremco CPG UK Limited has a team of experiencedTechnical...