Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
FM365_DS_GB_2020-08-28_WEB

FM365_DS_GB_2020-08-28_WEB
2Pages

Catalog excerpts

illbruckmaking it perfect. Description FM365 is a rapid curing, high yield, one component gun grade expanding polyurethane foam that is suitable for general gap filling, bonding and insulation applications. Colour Green Packaging 540 ml pressurised canister (12 per carton) Technical Information FM365 B3 Expanding Foam Max Necessary Tools • illbruck foam gun, conical adaptor/straw (for optimal volume), cutting knife and tape for masking of adjacent areas. AA290 PU Foam Cleaner to clear gun after use. Unstable areas may need to be clamped or secured during curing. Protective Equipment USE IN WELL VENTILATED CONDITIONS and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Preparation • Always carry out a test to confirm compatibility prior to use. • Protect floor coverings with paper or a plastic film. • Remove all loose particles, dust and grease. • A speedier cure can be attained by moistening the substrates if needed. Usage / Purpose FM365 is suitable for general gap filling, bonding and insulation applications. These include the perimeter sealing and fixing of windows and doors, sealing of non-fire rated service penetrations and sealing around insulation panels. Key Benefits • Ideal for filling, sealing and insulating of joints and gaps in a variety of building and construction applications • High yield application (when used with conical adaptor or straw) - joint requires filling to 60%, prior to postexpansion • Rapid cure formulation - foam is tack free within 8 minutes, and can be cut or trimmed within 45 minutes • Forms a strong bond to concrete, brickwork, stone, plaster, wood, fibre concrete, metal, PVC and polystyrene

Open the catalog to page 1

B3 Expanding Foam Max Application • Shake the canister vigorously at least 20 times. Remove the protective cap and screw the gun carefully onto the canister. • Apply conical adaptor AA005 (or similar) • Invert can and direct nozzle into gap, pressing gently on the trigger to establish the correct flow rate. • Joints should be underfilled to allow for post expansion of the foam. Fill to approximately 60% of joint depth for optimum results. • For best results always work with the canister in a vertical position and keep the valve pointed downwards. • On horizontal surfaces, always work away...

Open the catalog to page 2

FM365_DS_GB_2020-08-28_WEB 2Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

FM365_DS_GB_2020-08-28_WEB
2Pages