illbruckmaking it perfect. Description FM310 is a rapid curing gun grade expanding polyurethane foam that is suitable for general gap filling, bonding and insulation applications. Colour Green Packaging 750 ml pressurised canister (12 per carton) Necessary Tools • illbruck foam gun, cutting knife, tape for masking of adjacent areas. AA290 PU Foam Cleaner to clear gun after use. Unstable areas may need to be clamped or secured during curing. Protective Equipment USE IN WELL VENTILATED CONDITIONS and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Preparation • Always carry out a test to confirm compatibility prior to use. • Protect floor coverings with paper or a plastic film. • The surfaces must be dry, solid, stable and capable of carrying the load of the panels to be installed. • Remove all loose particles, dust and grease. • A speedier cure can be attained by moistening the substrates if needed. Usage / Purpose FM310 is suitable for general gap filling, bonding and insulation applications. These include the perimeter sealing and fixing of windows and doors, sealing of service penetrations and sealing around insulation panels. Key Benefits • Ideal for filling, sealing and insulation of joints and gaps in a variety of building and construction applications • Low post expansion improves accuracy of delivery, reduces foam wastage and minimises cutting time • Forms a strong bond to concrete, brickwork, stone, plaster, wood, fibre concrete, metal, PVC and polystyrene • Rapid curing formulation: Foam is tack free within 10 minutes, and can be cut or trimmed within 45 minutes

Application • Shake the canister vigorously at least 20 times. Remove the protective cap and screw canister onto the illbruck PU foam gun. • For use with the AA210 nozzle, fix the nozzle on the valve and turn by 90 degrees before use. When using, the canister should be kept upside down. Foam volume is regulated by using the adjusting screw and gun's trigger. • Joints should be underfilled to allow for post expansion of the foam. Fill to approximately 80% of joint depth for optimum results. • For best results always work with the canister in a vertical position and keep the valve pointed downwards....