Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
FA940_DS_GB_2020-01-18_WEB

FA940_DS_GB_2020-01-18_WEB
2Pages

Catalog excerpts

illbruckmaking it perfect. Description FA940 is a one-component, neutral cure, non-sagging elastic silicone adhesive based on alcoxy technology. The product forms an elastic adhesive offering good compatibility to the reverse side of mirrors according to the requirements of DIN EN 1036-1. Colours Transparent Packaging 310 ml cartridge (12 per carton) Technical Information Characteristic Chemical Base Specific Gravity Resistance to Flow/ Non-Sag Film Formation Time Curing Time Volume Shrinkage Tensile Strength at 100% Elongation Tensile strength at break Elongation at Break Elastic Recovery at 60% Elongation Shore A Hardness Application Temperature Service Temperature (short term) Storage Shelf Life Standard DIN 52451-A DIN EN ISO 7390 (20 mm profile) Internal test at 23°C/50% RH Internal test at 23°C/50% RH DIN EN ISO 10563 DIN EN ISO 8339 method A DIN EN ISO 8339 method A DIN EN ISO 8339 method A DIN EN ISO 7389 method A DIN 53505/ISO 868 Classification Alcoxy, neutral cure silicone ~ 1.03 g/m3 0 mm (non-sagging) ~ 10 mins. ~ 2.7 mm/1st day ~ 2% ~ 0.5 N/mm2 ~ 0.6 N/mm2 ~ 110% ~ 83% ~ 30 +5°C to +40°C -40°C to +120°C Mirror Adhesive Store in shaded dry conditions between +5°C and +25°C. 12 months when stored as recommended in original unopened containers. Necessary Tools • Cartridge gun Protective Equipment Use in well ventilated conditions and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Preparation • Substrates must be clean, dust and grease free, stable and dry. To remove grease or dust from glazed tiles, metal or glass surfaces, use AT200 Cleaner. For sensitive substrates (e.g. reverse side of mirrors or powder coated substrates), use the milder cleaner AT115. Usage / Purpose FA940 is ideal for bonding mirrors to vertical surfaces and for bonding sensitive plastics (e.g. PMMA and polycarbonate without causing stress cracking). Key Benefits • Suitable for bonding mirrors to vertical surfaces • Low odour • Non-corrosive and compatible with most construction substrates • Non-staining on natural stone substrates • Long term resistance to UV, weathering and ageing

Open the catalog to page 1

Mirror Adhesive illbruck making it perfect. Aluminium Aluminium Anodised Aluminium Powder Coating Galvanised Steel Stainless Steel Copper Brass • Compatibility with the reverse side protection layer of the mirror must be checked. Priming • Good adhesion is achieved on many substrates without the use of primer, (e.g. cleaned glass, glazed tiles, enamel). • Primer recommendations for possible pre-treatment are given in the primer table. Bricks, Concrete & Stone Concrete AT101 Metals +, AT150, AT120 +, AT150 Test in every case AT105, AT120 AT105, AT120 + + Acrylic Glass PMMA AT150 + = good...

Open the catalog to page 2

FA940_DS_GB_2020-01-18_WEB 2Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

FA940_DS_GB_2020-01-18_WEB
2Pages