illbruckmaking it perfect. Description FA870 is a one component, low slump silicone completely free of any ingredients likely to cause migratory staining to natural stone. It is neutral curing for safe sealing of stonework and has a conventional finish. Contains fungicide. FA870 is classified according to ISO 11600 as F-20HM. Please see table below for further classifications. Colours Available in 24 colours - see colour chart Packaging 310 ml cartridge (12 per carton) Technical Information Characteristic Classification Staining Specific Gravity Skin Formation Curing Rate Shrinkage Modulus at 100% Elongation Tensile Strength Elastic Recovery at 60% Elongation Movement Capability Shore A Hardness Application Temperature Service Temperature Storage Shelf Life Standard Classification +5°C to +40°C -40°C up to +150°C* *short term Store in shaded dry conditions between +5°C and +25°C. 18 months when stored as recommended in original unopened containers. Premium Natural Stone Silicone ///** 20% Necessary Tools • Geared cartridge gun, smoothing tools such as illbruck AA311. Protective Equipment Use in well ventilated conditions and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Joint Design Considerations • Joint design to be in accordance with BS 6093. • For the purposes of joint width calculation to ISO 11600, the maximum movement capability of FA870 is 20%. • Minimum joint width should normally not be less than 5 mm. • Typical maximum joint width of 30 mm, however, for all large joints (greater than 30 mm), please contact Tremco CPG to discuss project specifics. Usage / Purpose FA870 has been formulated for the long term elastic sealing of movement joints between natural stone such as granite, slate, terrazzo, porphyry, limestone, travertine, sandstone, quartzite, marble, etc., as well as for joints with other construction materials like concrete, ceramics, metals, glass, PVC and primed wood. Key Benefits • A high performance silicone sealant developed specifically for the sealing of natural stone whereby Tremco CPG guarantees no migratory staining • Good resistance to UV light, ageing and weathering • Contains fungicide to prevent mould growth - suitable for sanitary & swimming pool surround applications • Rapid curing formulation - skins within 10 - 20 minutes • Chemically neutral, not corrosive and very low odour • Compatible with most construction materials

Premium Natural Stone Silicone illbruck making it perfect. Natural Stone Concrete Fibre Concrete Brick Aluminium Aluminium Anodised Aluminium Powder Coating Galvanised Steel Stainless Steel Copper Brass Iron • Width to depth ratio should typically be 2:1. • Minimum width to depth ratio should typically be 1:1. Please note MAF is reduced at smaller width to depth ratios. • The minimum contact area with any substrate (including for fillet joints) should be determined by the quality of the bond. If in doubt please contact Tremco CPG. • PE backing rod should be used in all movement joint applications....