illbruckmaking it perfect. Description FA600 is a gun grade, neutral cure silicone sealant with fungicide. Colour Translucent, white, brown, black and grey Packaging 310 ml cartridge (20 per carton) 600 ml sausage (20 per carton) Environmental Considerations The use of FA600 in the correct application will give an airtight seal in conformity with the requirements laid down in Approved Document L of the Building Regulations for England and Wales. Technical Information Characteristic Composition Specific Gravity Consistency Shore A Hardness Skin Forming Time Tack Free Time Cure Rate Tensile Strength Modulus at 100% Elongation Elongation at Break Movement Capacity Elastic Recovery Application Temperature Service Temperature Range Storage Shelf Life Standard Classification neutral cure silicone sealant with fungicide ~ 1.01 ISO 7390, profile U20 non-sag +5°C to +40°C -40°C to +150°C Store in dry conditions between +5°C and +25°C. 12 months when stored as recommended in original unopened containers. Necessary Tools • Cartridge gun and sharp knife. Protective Equipment Use in well ventilated conditions and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Usage / Purpose FA600 cures rapidly to form a permanently flexible and extremely durable watertight seal. It is designed for sealing glazing applications, window and door perimeters, display cases, conservatories and greenhouses. Key Benefits • Meets the requirements of ISO 11600-F&G-25LM • Long-term resistance to weathering, ageing and UV • Wide Service Temperature Range: from -40°C to +150°C • Neutral curing: compatible with sensitive substrates

illbruckmaking it perfect. Coverage Width x Depth (mm) 6 x 6 10 x 6 10 x 10 20 x 10 25 x 12 Linear metres per 310 ml Cartridge 8.6 5.2 3.1 1.6 Fillet Joint Width x Depth (mm) Linear metres per 310 ml Cartridge 6 x 6 17.0 Linear metres per 600 ml Sausage 16.7 Fillet Joint Width x Depth (mm) Linear metres per 600 ml Sausage 6 x 6 33.3 Cleaning Remove excess sealant immediately with AT200 High Strength Cleaner. Ensure surface is solvent resistant before cleaning. Cured sealant can only be removed mechanically. Please Note Not suitable for some substrates such as neoprene, butyl rubber, EPDM, bituminous...