Catalogs >
Tremco CPG Iberia & Italia - Windows & Facade >
CT456_DS_GB_2020-06-18_WEB

CT456_DS_GB_2020-06-18_WEB
2Pages

Catalog excerpts

illbruckmaking it perfect. Description CT456 is a spray-applied, modified chloroprene rubber contact adhesive that is ideal for laminating, postforming and similar applications. Colour Yellow Packaging 25 litre drum Technical Information Characteristic Composition System Specific Gravity Viscosity (at 20°C) Flash Point Coverage Open Joint Time Results (Typical Values) Modified polychloroprene blend Solvent evaporation 0.82 120 - 280 cps Below -20°C 5.0 to 9.0 m2 of bonded area per litre Porous Substrates: Instant to 25 minutes Non-Porous Substrates: 5 to 45 minutes Application Temperature Shelf Life 12 months when stored as recommended in original, unopened containers Sprayable Contact Adhesive Necessary Tools • For optimum results tremco illbruck recommend Binks & DeVilbiss® pumping and application equipment. Protective Equipment USE IN WELL VENTILATED CONDITIONS and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Preparation • Surfaces must be clean, dry, smooth, firm and free from any traces of contaminant which may affect adhesion. • Metal surfaces must be degreased using AT200 High Strength Cleaner and completely dry before bonding. Application • The adhesive should be applied in a uniform spray, coating both surfaces and bringing substrates together as soon as the coating is dry to the touch. • Ensure intimate contact and consolidation of the bond is achieved by passing the laminate through nip rollers or by platen pressing using maximum pressure without crushing the components. Usage / Purpose CT456 has a variety of industrial applications, but is particularly suited to the postforming of plastic laminates. The adhesive has good temperature resistance, instant grab and high ultimate bond strength, so is suitable for even tight radii postforming. It is also used for bonding a wide range of materials, such as metals, expanded foams, plywood, OSB, particleboard, hardboard and plasterboard. Key Benefits • Very high initial grab and ultimate bond strength contact adhesive • Ideal for laminate postforming, even in tight radii operations • Improved atomisation allows immediate lay up, eliminates blooming and reduces odour • Sprayable formulation allows high coverage rates and rapid application times to be achieved

Open the catalog to page 1

Sprayable Contact Adhesive illbruck making it perfect. Cleaning Clean tools, equipment and any uncured adhesive with AT200 High Strength Cleaner. Please Note Bonding to painted surfaces is not recommended. Not suitable for bonding expanded polystyrene. Do not use for bonding highly plasticised PVC's. Health & Safety Precautions Safety data sheet must be read and understood before use. Highly flammable - keep away from open flames and other ignition sources. Technical Service Tremco CPG UK Limited has a team of experienced Technical Sales Representatives who provide assistance in the...

Open the catalog to page 2

CT456_DS_GB_2020-06-18_WEB 2Pages

Catalog excerpts

All Tremco CPG Iberia & Italia - Windows & Facade catalogs and technical brochures

CT456_DS_GB_2020-06-18_WEB
2Pages