illbruckmaking it perfect. Description CT113 is a viscous liquid adhesive made from a blend of synthetic rubber and resins, developed for the bonding of illbruck EPDM membranes. Colour Black Packaging 4.7 kg pail Technical Information Characteristic Composition System Specific Gravity Drying Time (at 20oC) Final Adhesion Strength Peel Strength Application Temperature Service Temperature Storage Shelf Life Classification A blend of synthetic rubber and resin Solvent evaporation 0.8 approx. 20 minutes 24-48 hours 50 N/25 mm +50C to +350C -20oC to +80oC Store in shaded, dry conditions between +5°C and +250C 12 months when stored as recommended in original, unopened containers EPDM Membrane Adhesive EPDM-Follenkleber Konlaktni tasadni lepidlo Kontaktne fasadne lepidlo kOMT3KTMblM Kneti APP oenT EPDM Klej dp EPDM EPDM Membrane Adhesive Necessary Tools • Installation requires some or all of the following depending on whether priming is required: tape measure, scissors or illbruck shears, sharp knife, brush, seam roller, container for adhesive dilution for priming, mixing tool, solvent (AW421). In certain cases, adhesive tape may be required for temporary fixing of membranes. Protective Equipment USE IN WELL VENTILATED CONDITIONS and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Preparation • Always carry out a test to confirm compatibility prior to use. • All surfaces must be dry, clean and sound, free from dirt, grease and other contamination. • Use mechanical abrasion to clean porous surfaces if necessary before sealing. • It is recommended to degrease the substrate (and membrane if necessary) by using isopropanol. Usage / Purpose CT113 is a viscous adhesive developed for the bonding of ME220 EPDM membranes, particularly in fagade applications. CT113 is compatible with surfaces such as wood, metal, masonry and other building materials. Key Benefits • Ideal for bonding of ME220 EPDM membranes in facade installations • Cured adhesive has excellent resistance to weathering and the ageing effects of UV exposure • Adhesive accommodates a wide fluctuation in service temperature from -20oC up to +80oC • Cures within 20 minutes to form a high strength and elastomeric connection • High initial adhesion strength

Priming • Porous substrates may need to be primed. As a primer, dilute 0T113 in ratio 1 part 0T113 to 2 - 3 parts AW421 solvent (by volume). • Apply primer onto porous materials using brush or roller to the whole of the final bonded area (Fig.1). • Application of the adhesive must be delayed until after the primer is fully cured (10 - 30 min). • Use a separate container for the primer dilution and never return the remaining mixed material into the CT113 adhesive. • The use of primer onto porous materials not only improves adhesion but also reduces consumption of adhesive and substantially extends...