Description AW405 consists of a polyethylene film with a rubber adhesive. Colour Black Packaging Supplied in 100 m length rolls. Various roll widths are available. For more information, please contact an illbruck Area Sales Manager on 01942 251400. Technical Information Property Result Peel Adhesion to Stainless Steel 1.1±0.2 N/cm (QMP 02) * Breaking Strength** (QMP 03) * Machine Direction (MD) > 17 N/mm2 Elongation at Break** Machine Direction (MD) > 180% Resistance to Moisture Good Resistance to Solvents Moderate Application Temperatu re Storage Shelf Life +10°C to +40°C Store rolls at temperature below 40°C 6 months from date of production when stored as recommended in original unopened packaging * QMP: internal method of measurement ** Raw film data Application Conditions • The surface must be free from oil, grease, dust and solvents. • Ensure frame is dry (condensation increases adhesion and makes removal more difficult). • Apply in temperatures between +10°C and +40°C. • Cover full frame or UV may cause differential staining. • The tape should be removed (and if necessary replaced) 6 months maximum after application as UV exposure is likely to make subsequent removal difficult and could cause damage to the frame. Health & Safety Precautions Safety data sheet must be read and understood before use. Please Note The above data and recommendations are given in good faith, on the basis of practical experience, but without warranty. The customer should carry out their own tests to confirm the suitability of the product for the application under consideration. Above technical data subject to tolerances up to 15%. illbruckmaking it perfect. Frame Protection Tape Usage / Purpose AW405 Frame Protection Tape is a self-adhesive tape suitable for the protection of sensitive surfaces against dirt and damage during processing, transport, storage and installation. Typical substrates suitable for protection include painted metal (PVDF, polyester), plastic sheets (PVC, PC, melamine). It is particularly suitable for protecting window and door frames. The film must be removed and potentially replaced at a maximum 6 months following application due to potential UV degradation causing difficult removal and potential damage to the frame. Key Benefits • Protects sensitive surfaces from dirt, scratching, spillage • Easy application • Easy removal • 6 months UV resistance

illbruck making it perfect. Technical Service Tremco CPG UK Limited has a team of experienced Technical Sales Representatives who provide assistance in the selection and specification of products. For more detailed information, service and advice, please call Customer Services on 01942 251400. Guarantee / Warranty Tremco CPG UK Limited products are manufactured to rigid standards of quality. Any product which has been applied (a) in accordance with Tremco CPG UK Limited written instructions and (b) in any application recommended by Tremco CPG UK Limited, but which is proved to be defective, will...