illbruckmaking it perfect. Results (Typical Values) Store in shaded dry conditions between +10°C and +25°C. Store canisters upright. The product is contained in a pressurised container - observe storage instructions and do not apply heat. 12 months when stored as recommended in original, unopened containers Description AA290 is a powerful solvent-based aerosol cleaner for removing uncured PU foam. The double action canisters are supplied with a threaded adaptor for screwing onto PU application guns, and with a spray nozzle to be used as a handheld aerosol. Colour Colourless Packaging 500 ml canister (12 per carton) Technical Information Shelf Life Necessary Tools AA290 is ready-to-use, no additional tools or equipment required. Protective Equipment USE IN WELL VENTILATED CONDITIONS and ensure all recommended protective equipment is worn during handling & use of this product. For full recommendation, refer to safety data sheet. Preparation Always carry out a test to confirm material is unaffected by solvent. Application • Use only in well-ventilated areas and protect surrounding surfaces from splashes. Wear protective equipment. • Shake the can to mix the contents before use and periodically during use. If using a dispensing gun screw the canister onto the gun and thereafter follow the canister label instructions. • Do not use for general cleaning applications. May soften and discolour some materials (e.g. plastics) Please Note The product will not dissolve cured PU foam. Health & Safety Precautions Safety data sheet must be read and understood before use. Extremely flammable - keep away from open flames and other ignition sources. Usage / Purpose AA290 is designed for the cleaning of PU foam applicators and the removal of uncured illbruck PU Foam from applicator guns, tools and similar ancillary equipment. It can also be used to remove uncured foam spillages from solvent-resistant surfaces. Key Benefits • High power cleaner for removing uncured illbruck polyurethane foam and cleaning equipment • Ideal for cleaning PU foam guns after use to ensure efficient operation and extend service life • Double action cleaner. Can be fitted directly to PU foam gun, or used as a handheld aerosol to clean spills, tools, etc.

illbruckmaking it perfect. Technical Service tremco illbruck has a team of experienced Technical Sales Representatives who provide assistance in the selection and specification of products. For more detailed information, service and advice, please call Customer Services on 01942 251400. Guarantee / Warranty tremco illbruck products are manufactured to rigid standards of quality. Any product which has been applied (a) in accordance with tremco illbruck written instructions and (b) in any application recommended by tremco illbruck, but which is proved to be defective, will be replaced free of charge....