FLOOR DRAIN SYSTEMS
3Pages

DRAIN SYSTEMS The Tournus Equipement ranges is extended to new floor drain systems of 1000, 1500, 2000 and 2500 mm long in width of 250 mm. This drain systems are designed to be positioned in corridors in front of elevators and doors of premises. It is also extended to non-slip stainless steel grating available on all the models of drain systems. Thus, thanks to the wide range of Tournus drain systems, it is always possible to find one that meets the exact needs of any installation. There are 276 models for use in canteen and restaurant kitchens and supermarkets, for tiles or resin floor coverings. APPLICABLE TO ALL THE FLOOR DRAINS : Small dimensions for the reservation: no recess is required in the concrete slab flooring to install drain systems. A reserved hole or core drilling of diameter 225 mm suffices. Outlet diameter 100 mm: this allows for easy connection to the type of piping used most often. FLOOR FLOOR DRAINS WITH ADJUSTABLE BOWL The body that supports the grating is independent; it is suitable for a combined screed + tiling depth of 55 to 150 mm. The drain system creates waterproofing of the slab with overlaps into the casing prior to applying the screed. The body can be moved in all directions to make it easier to lay the tiles. FLOOR DRAINS WITH SINGLE-PIECE BOWL Simplified model for installation without any need for re-waterproofing. DRAINS WITH VERTICAL The removable funnel-type trap makes cleaning ofthe whole drain easier. FLOOR DRAINS WITH HORIZONTAL OUTLET Shallower, discharge. DRAINS WITH OFF-CENTRE To facilitate installation when an appliance which is difficult to move is to be installed over the drain. S AFETY Tournus pays great attention to the design and manufacture of its products in order to be able to guarantee durable use under the best possible conditions. 1 DURABILITY WITH TIME Stainless steel construction. The trap housing is press-drawn, with no weld in the area of the water trap. The mesh size of the gratings is 19 x 19 mm, for easy passage of trolleys. 3 HIGH THROUGHPUT 4 litres per second. 2 2 ’HYGIENCE The depth of water is 60 mm, in accordance with the “DTU”. The outlet includes a cross to trap pieces of scrap. The gratings, with a choice of either stainless steel or galvanised, can be cleaned in a si

Floor drains with vertical outlet Stainless steel construction with stainless steel or galvanised grating, mesh size 19 x 19 mm. Distributed load: 3 t/m2 New Non*sl'p GR#'nG Floor drains Central outlet With adjustable bowl With one-piece bowl Off-centre outlet

Floor drains with horizontal outlet Stainless steel construction with stainless steel or galvanised grating, mesh size 19 x 19 mm. Distributed load: 3 t/m2, concentrated load: 750 kg. Independent scrap bucket. Press-drawn floor drain casing, regulatory water height of 60 mm. Outlet 0 100 mm, throughput 4 litres/second. Floor drains with adjustable body: suitable for a combined screed + tiling depth of 55 to 150 mm. The floor drain creates waterproofing of slab with overflaps into the casing proior to applying the screed' Floor drains with single-piece body: grating support body integral to...