GLAZING PUTTY
1Pages

GLAZING PUTTY (WHITE) FLEXIBLE - WILL NOT CRACK ON INTERIORS & EXTERIORS     LONG-LASTING COMPATIBLE WITH ALL PAINTS & COATINGS DOESN'T STICK TO YOUR HANDS WILL NOT SMEAR GLAZING PURPOSE White putty for the glazing of wooden window frames. TOUPRET SA - 24 rue du 14 juillet - 91813 CORBEIL ESSONNES Cedex - RCS Evry B 964 201 859 – Mise à jour Mars 2021 SUBSTRATES Glazing Putty can be applied to any types of woods, including common exotic species, and all primed wood. The substrate must be previously primed. Do not use for double glazing fitting. RECOMMENDATIONS and care for use The times mentioned are indicative and depend on the substrate, coat thickness, and the ambient conditions. Do not apply at a temperature below 5°C or above 35°C nor at a relative humidity over 80%. SUBSTRATES PREPARATION Substrates to be prepared as per the current trade practices. Substrates must be hard, cohesive, clean, sound and dry. OVERCOATING Glazing Putty can be overcoated with paint, varnish or preservative NORMATIVE DOCUMENTS to be referred to coat once a skin has formed.  NFT 36-005: Characterization of paint products. Physical and technical FEATURES  Linseed oil based putty, for interior or exterior use.  Characterization (NFT 36-005): Family IV class 1.  Mixing rate: ready to use.  Coverage: 6m per kg.  Overcoating: painted/overcoated once a skin has formed (6 to 8 days).  Color: white. HEALTH AND SAFETY It is recommended to wear gloves and glasses while applying Glazing Putty white. Always wear a dust mask when sanding. Dispose of unused product and packaging responsibly at your local waste collection centre. Safety data sheet available at www.toupret.co.uk USE AND STORAGE CONDITIONS • Application tools: for putty and back putty, apply with a putty knife, for single glazing, glass from 4 to 6mm thick. The minimum thickness of the back putty must be 3mm, the minimum length of the fillet must be 9mm. • Tool cleaning: after use, clean tools with white spirit. • Preservation: guaranteed for 12 months from purchase when used as intended, kept in its original sealed packaging and stored away from sunlight and frost. If found to be faulty within the guarantee period, we will arrange a replacement on proof of purchase. The data sheet information, especially the guidelines relevant to the application and final use of the product are provided in good faith and result from TOUPRET’s experience and knowledge of the products. The product should be used as per the trade practices rules book and in reference to our recommendations. The information provided is relevant to applications processed at a temperature of 20°C, a relative humidity of 50% and on average absorbency substrates. The times mentioned are only indicative and depend on the substrate, the coat thickness, and the ambient conditions. TOUPRET (UK) LIMITED • CAPITAL BUSINESS CENTRE • UNIT 58, 22 CARLTON ROAD • SOUTH CROYDON CR2 0BS Tel: +44 (0)208 916 2134 • WWW.TOUPRET.CO.UK * Information on the emission level of volatile substances into indoor air, presenting a risk of toxicity by inhalation, on a scale from A+ (v