Brochure SMMS-e
20Pages

{{requestButtons}}

Catalog excerpts

Brochure SMMS-e - 2

OMFORT TO AWHOLE NEW DIMENSION I s • ■ The expectations of an air conditioning system have evolved in the last few years. Today advanced comfort has to go hand in hand with reduced energy and maintenance cost, combined with maximized simplicity and operational flexibility. SMMS-e has the right answer to all of these requirements. It encompasses all of the innovations, experience and knowledge from the past and utilizes new technologies to create a product that ensures its place within the market, as one of the industries leaders in providing, highly efficient solutions to the market, whilst...

Open the catalog to page 2
Brochure SMMS-e - 3

FICIENCYLOW OPERATION COST In 2004, Toshiba launched into the market an ALL inverter VRF systems that would revolutionize the industry and set a new benchmark in system efficiencies. Now in 2015, the all new SMMS-e system has taken this philosophy and again pushed the barriers of what is achievable. Thanks to Toshiba's unique compressor technology, re-designed heat exchanger and Toshiba‘s “intelligent flow” technology for perfect refrigerant management, energy costs are sent plummeting, while comfort remains as outstanding as ever! ALL INVERTER INFINITE VARIABLE CONTROL TWIN ROTARY...

Open the catalog to page 3
Brochure SMMS-e - 4

CREATING BENEFITS AROUND BENEFITS FOR THE USER EFFICIENT COOLING ● Infinite comfort ... Achieved by fully controllable room temperature, a perfect alternative to traditional heating & cooling systems ● Infinite efficiency … Low operating costs thanks to reduced installation costs and very high levels of efficiency via optimal load adjustment EFFICIENT HEATING ● Infinite integration … Cooling, heating, hot water, fresh air ventilation and door air curtain solutions, all perfectly and conveniently attuned to one another within a single system – and so easy to use! ● Infinite reliability …...

Open the catalog to page 4
Brochure SMMS-e - 5

FOR THE CONSULTANT • Absolute customisation ... A wide range of products ensure that the customers' requirements are fully addressed • Absolute validation ... SMMS-e has applied for EUROVENT certification and adheres to all current European legislation • Absolute control ... Fully integrated controls network, allowing unlimited access to the system controls and its operation • Absolute flexibility ... A high degree of system flexibility, aided by a fully flexible piping specification and an extremely compact modular design • Absolute dependability ... Years of experience in developing...

Open the catalog to page 5
Brochure SMMS-e - 6

THE WHOLE IS MORE THAN THE SUM OF ITS PARTS. Aristotelest KEY TECHNOLOGIES When Toshiba launched the industries 1st ALL inverter VRF system, it became a leader within its market. So when this design evolves into an even better, more efficient solution is due, not because of a single new feature, but because of the dedication shown to perfecting every key technology and component, which when brought together forms a product that again leads the way. When viewed in isolation, not all that different from our rivals – granted. But, taken as a whole, a decisive, evolutionary step forward into a...

Open the catalog to page 6
Brochure SMMS-e - 7

1. INNOVATIVE COMPRESSOR TECHNOLOGY TOSHIBA’s infinitely variable, inverter driven control can continually adjust in real time, the operating speed of the compressors.This ensures that the capacity output precisely matches that of the demand from the end user. The advantages of this control are optimised further by incorporating TOSHIBA’s in-housed designed all inverter twin rotary compressors. The twin rotary design is one of the key technologies that has been continually developed by Toshiba, to ensure maximum performance and efficiency. This enables the new SMMS-e system to achieve class...

Open the catalog to page 7
Brochure SMMS-e - 8

2. INTELLIGENT FLOW TECHNOLOGY This unique control continually adjusts the operation of both indoor and outdoor units, based on the feedback from multiple sensors located throughout the system. Excess capacity in units A & B can be re-distributed to units C & D, ensuring perfect operation throughout the entire system ● Refrigerant flow to each indoor unit is precisely controlled by the outdoor unit, ensuring even distribution of capacity throughout the entire system. ● The evaporative and condensing temperature is continually adjusted automatically, to maintain an optimum indoor room...

Open the catalog to page 8
Brochure SMMS-e - 9

4. OPTIMISED HEATING OPERATION A key development for the new SMMS-e range is its ability to extend and in many cases eliminate the requirement for a full outdoor defrost operation. This new feature is based on a newly developed hot gas by-pass control, which when activated allows the compressors to provide the outdoor coil with an uninterrupted supply of high temperature refrigerant, whilst also extending the operation running time of the indoor units. NEW ● Optimised Heating Operation – How does it work? The new SMMS-e system incorporates a new control algorithm based on continually...

Open the catalog to page 9
Brochure SMMS-e - 10

The SMMS-e Wave Tool allows the user to read and write data directly from the outdoor unit using only their smart phone. Therefore mitigating the need to connect a PC or gaining access to the control board of the outdoor unit. In case of below s Installation Service mainten Power failure This tool, will allow the service and commissioning engineer to instruct and obtain key system information. This will not only simplify the commissioning of the system and the amount of time spent on-site, but also allows the servicing engineer the ability to quickly and easily send key system data via...

Open the catalog to page 10
Brochure SMMS-e - 11

6. NEW INNOVATIVE HEAT EXCHANGER AND FAN BLADE DESIGN ● New 3-row heat exchanger design with reduced pipe size from 8 mm to 7 mm and an increase in the total number of passes, improves both system performance and efficiency heat exchanger ● 4-sided heat exchanger ensures maximum possible flow rate across the entire coil, maximizing system efficiency machine room ● 3-way variable heat exchanger design, allows the CDU to select the most efficient heat exchanger size, which precisely matches the indoor capacity load ● New Sub cooling heat exchanger increase system operating performance and...

Open the catalog to page 11

All TOSHIBA air conditioning catalogs and technical brochures

  1. HM_UTP

    2 Pages

  2. HM_MUT

    2 Pages

  3. GM_UT

    2 Pages

  4. GV_AT(8)P

    2 Pages

  5. CATALOGUE VRF

    80 Pages

  6. SHORAI EDGE

    5 Pages

  7. MIRAI R32

    2 Pages

  8. DAISEIKAI 9

    8 Pages

  9. MIRAI

    8 Pages

  10. Shorai R32

    10 Pages

Archived catalogs

  1. ESTIA

    8 Pages

  2. SMMS

    64 Pages

  3. SHRM

    16 Pages

  4. MiNi SMMS

    26 Pages

  5. SDI/DI

    23 Pages

  6. daiseikai

    4 Pages