Plastic Flooring

What is tokoz Premium? These are raised and plastic flooring pedestals used in terraces that may or may not be walked on. They are designed to reach the desired final elevation and eliminate the difference in slope. Their purpose is to enable making the last layer of flooring without using protective alum on the insulation. These pedestals also aim to provide a continuous drainage system through the open joint gaps of the floor tiling. Adjustable plastic flooring pedestals offer a system that can be intervened under potential insulation problems. They are also quite durable with a carrying capacity...

Adjustable Pedestal Premium HEAD The Head part is attached to the connecting pieces or the base part. By placing joint sticks and skeleton assembly apparatus to the side and central gaps of this head part, tile or lath flooring can be performed. T-C After 181 mm, products are heightened by connecting pieces. More than one piece per module can be used. Electricity wiring and waterwork can be tied to the side and upper parts of these products. This allows for easy access and technical efficacy by holding the installations higher than the ground. T-L The tightening lock is usually used in higher...

No connecting piece is required up to 181 mm.

This button ensures that the head part or the Coupler screw-side protrusion, which are placed to the gaps in the base part or Coupler wall, do not surpass the safe elevation level in the application process while adjusting. In this way, the application process is up to the standards and the users‘ safety is guaranteed. Safe Level Button

Flooring dimension Pedestal Premium Usage Amounts Edges and corners may lead to extra consumptions. Adjustable Pedestal Premium works with a jack system and can be used as a single part in edges and corners. So, in proportion to space width, consumption is decreased.

In this process, fundamentally, an adjustment gasket and joint stick with ten different types are required. Angular placement is possible, depending on the floor plan. Angular Flooring

Premium tile flooring

T-ST The joint stick and its 2, 4, 6 and 8 mm of width alternatives can be rotated 360 degrees around their axis. The length of these products is 16 mm and has an alternative type with a length of 38 mm and a width of 4 mm. T-SF This product can be fixated by placing it into square-shaped holes. It is recommended that this product is used in floorings with no set-square problems. T-AFJ This product is used in tile floorings. It is usually preferred for specific details where pedestal connection via screws is desired. The joint pieces can be broken down into pieces for tricky floors and edges....

TCT-RAIL System Product list T-A4 & T-A7 PEDESTAL T-AP JOIST HOLDER CP-P1 ALUMINUM JOIST CP-P1FC FLAT CONNECTOR CP-P1CC CORNER CONNECTOR CP-SR ROLL SPONGE CP-P1SP3 PLUS JOINT CP-PAVER 600x600x20 mm

Alternative Tile Flooring Details

Premium lath flooring

T-AP T-AP is used to connect the pedestal and CP-P1 and equivalent skeletons, which are used to support tile and lath floorings. Skeletons are attached to the piece by clicking. T-AR This skeleton assembly apparatus can be assembled into any gap of the head part except for the central one, and it can be rotated 360 degrees around its axis. Screwing is possible due to holes on the sides of the product. With this product, all skeletons from 1 cm to 10 cm can be used. Lath Flooring T-AW The circle-shaped skeleton assembly apparatus is first assembled to the skeleton via a screwdriver with distances...

TCL-RAIL System Product list T-A4 & T-A7 PEDESTAL T-AP JOIST HOLDER CP-P1 ALUMINUM JOIST CP-P1FC FLAT CONNECTOR CP-P1CC CORNER CONNECTOR CP-SR ROLL SPONGE CP-P1DCAL FIXING CUP WPC-AL WOOD PLASTIC COMPOSITE DECK

Alternative Lath Flooring Details

T-P Orthopedic Base Pad made of rubber raw material can be used in floors with faulty polish, and it absorbs impact vibrations that can occur in the system in the long run. It has a width of 5 mm.

Slope Correctors T-SC The base part can be placed on the slope corrector, eliminating the effects of the slopes created for drainage. The apparatus is designed to be fixated on the base part and with 1% and 2% alternatives.

T-L The tightening lock is usually used in higher elevations, and it prevents disruptions that can happen over long periods of time due to vibration. It provides a fast and easy application without requiring galvanizing or stainless steel. They are designed to reach the desired final elevation and eliminate the difference in slope.

Product list T-UW TILE HOLDER CP-PAVER 600x600x20 mm T-AFJ FILLING HEAD T-A6 PEDESTAL

Product list CP-NATURADECK TILE T-WS TILE STABILIZER T-AFJ FILLING HEAD T-A6 PEDESTAL for tile deck stability

Product list T-A5 PEDESTAL T-P JOIST HOLDER CP-P1 ALUMINUM JOIST CP-P1FC FLAT CONNECTOR CP-P1CC CORNER CONNECTOR CP-SR ROLL SPONGE CP-P1SP3 PLUS JOINT CP-PAVER 600x600x20 mm

Product list CP-PAVER 600x600x20 mm CP-F1 EDGE FINISHER T-A4 PEDESTAL

CP-F1 CP-F1 is used for supporting smaller tiles in the edges. It can be moved in one direction on the pedestal and can support different sized tile pieces.

Product list CP-PAVER 600x600x20 mm CP-F2P STAIR HOLDER CP-F3P STAIR HOLDER T-A6 PEDESTAL

TOKOZ ULUSLARARASI PLASTİK MALZEMELER SAN. TİC. A.Ş. +90 212 540 09 49 [email protected] Haramidere San. Sit. L Blok Pırlanta Sok. NO:70/213 34524 Beylikdüzü-Istanbul / TURKEY www.tokozint.com All rights reserved. Errors and printing errors except