Plastic Flooring

What is tokoz Clever? These are raised and plastic flooring pedestals used in terraces that may or may not be walked on. They are designed to reach the desired final elevation and eliminate the difference in slope. Their purpose is to enable making the last layer of flooring without using protective alum on the insulation. These pedestals also aim to provide a continuous drainage system through the open joint gaps of the floor tiling. Adjustable plastic flooring pedestals offer a system that can be intervened under potential insulation problems. They are also quite durable with a carrying capacity...

Adjustable Pedestal Clever C-SLH With its moving head, it eliminates any ground-based slope up to 7%. C-SLB By placing them on the head part, a ground for the C-SLH piece can be obtained. When placed on grounds with a slope of up to 7%, the C-SLH piece enables them to be even. HEAD The Head part is attached to the connecting pieces or the base part. By placing joint sticks and skeleton assembly apparatus to the side and central gaps of this head part, tile or lath flooring can be performed. C-SR This piece connects the head and base parts or C-C pieces. It allows for millimetric adjustment. C-C...

TCT-RAIL System

No connecting piece is required up to 220 mm. C-4

The screwed part protrusion of the Head part is fastened to the gap in the adjustment stud wall. This prevents passing the safe level of elevation while adjusting in the application process. In this way, the application process is up to the standards and the users‘ safety is guaranteed. Safe Level Button

Flooring dimension Pedestal Clever Usage Amounts Edges and corners may lead to extra consumptions. Adjustable TOKOZ works with a jack system and can be used as a single part in edges and corners. So, in proportion to space width, consumption is decreased.

In this process, fundamentally, an adjustment gasket and joint stick with ten different types are required. Angular placement is possible, depending on the floor plan. Angular Flooring

Clever tile flooring

T-ST The joint stick and its 2, 4, 6 and 8 mm of width alternatives can be rotated 360 degrees around their axis. The length of these products is 16 mm and has an alternative type with a length of 38 mm and a width of 4 mm. T-SF This product can be fixated by placing it into square-shaped holes. It is recommended that this product is used in floorings with no set-square problems. T-AFJ This product is used in tile floorings. It is usually preferred for specific details where pedestal connection via screws is desired. The joint pieces can be broken down into pieces for tricky floors and edges....

TCT-RAIL System Product list C-4 & C-6 PEDESTAL T-AP JOIST HOLDER CP-P1 ALUMINUM JOIST CP-P1FC FLAT CONNECTOR CP-P1CC CORNER CONNECTOR CP-SR ROLL SPONGE CP-P1SP3 PLUS JOINT CP-PAVER 600x600x20 mm

Alternative Tile Flooring Details

Clever lath flooring

T-AP T-AP is used to connect the pedestal and CP-P1 and equivalent skeletons, which are used to support tile and lath floorings. Skeletons are attached to the piece by clicking. T-AR This skeleton assembly apparatus can be assembled into any gap of the head part except for the central one, and it can be rotated 360 degrees around its axis. Screwing is possible due to holes on the sides of the product. With this product, all skeletons from 1 cm to 10 cm can be used. Lath Flooring T-AW The circle-shaped skeleton assembly apparatus is first assembled to the skeleton via a screwdriver with distances...

TCL-RAIL System Product list C-4 & C-6 PEDESTAL T-AP JOIST HOLDER CP-P1 ALUMINUM JOIST CP-P1FC FLAT CONNECTOR CP-P1CC CORNER CONNECTOR CP-SR ROLL SPONGE CP-P1DCAL FIXING CUP WPC-AL WOOD PLASTIC COMPOSITE DECK

Alternative Lath Flooring Details

Slope Corrector Head C-SL Slope Corrector Head eliminates the effects of the slopes (up to 7%) created for drainage and enables an even ground. C-SLH With its moving head, it eliminates any ground-based slope up to 7%. C-SLB By placing them on the head part, a ground for the C-SLH piece can be obtained. When placed on grounds with a slope of up to 7%, the C-SLH piece enables them to be even.

T-P Orthopedic Base Pad made of TPE raw material can be used in floors with faulty polish, and it absorbs impact vibrations that can occur in the system. It has a width of 5 mm.

Product list CP-NATURADECK TILE T-WS TILE STABILIZER T-AFJ FILLING HEAD C-4 PEDESTAL for tile deck stability

Product list T-UW TILE HOLDER CP-PAVER 600x600x20 mm T-AFJ FILLING HEAD C-5 PEDESTAL

Product list C-4 PEDESTAL T-AP JOIST HOLDER CP-P1 ALUMINUM JOIST CP-P1FC FLAT CONNECTOR CP-P1CC CORNER CONNECTOR CP-SR ROLL SPONGE CP-P1SP3 PLUS JOINT CP-PAVER 600x600x20 mm

Product list CP-PAVER 600x600x20 mm CP-F2C STAIR HOLDER CP-F3C STAIR HOLDER C-5 PEDESTAL

Product list CP-PAVER 600x600x20 mm CP-F1 EDGE FINISHER C-4 PEDESTAL

CP-F1 CP-F1 is used for supporting smaller tiles in the edges. It can be moved in one direction on the pedestal and can support different sized tile pieces.

Fixed Pedestal Clever

It has a height of 3 mm. It is designed so that a single joint piece can be separated by breaking for tricky floorings. It can be made of soft raw material, which allows floorings on pebbles. Flooring dimension

C-F1 It has a height of 15 mm. It can be separated into four parts which prevents extra consumption in edges and corners. C-FS This product is designed with 1- and 2-mm alternatives and made of TPE raw material. It aims to eliminate the calibration problems usually encountered in tile flooring products. It is used between the tile and the pedestal and absorbs the impact vibration. It is recommended that this product is used in each pedestal module. C-FS can be broken into four pieces. Flooring dimension

It has a height of 20 mm. It can be separated into four parts which prevents extra consumption in edges and corners. It has a height of 25 mm. It can be separated into four parts for edges and corners. With its moving head, it can absorb the vibrations caused by the defects on the ground. Same efficacy can be acquired by using it on the adjusted products. Flooring dimension