TECHNICAL SPECIFICATIONS PREMIUM & CLEVER PLASTIC RAISED FLOATING FLOOR PEDESTALS (USED FOR INDOORS AND OUTDOORS) TOKOZ PLASTIC & BUILDING MATERIALS INTERNATIONAL

TOKOZ PLASTIC & BUILDING MATERIALS INTERNATIONAL 1. DEFINITION OF UNIT PRICE 1.1. FLOATING FLOOR PEDESTALS CALLED AS PLASTIC ADJUSTING WEDGE It is a turnkey price per square meter, including expenses such as any material and losses/damages, workmanship, vehicle, machine, equipment rent and expenses, correction of defective manufacturing and / or removing and re-paving, transportation, vertical and horizontal handling, storage costs and insurance that are required to perform pavement process by using TOKOZ and complementary products in order to attain intended final elevation and eliminate the...

TOKOZ PLASTIC & BUILDING MATERIALS INTERNATIONAL 2.4 QUALITY ASSURANCE 2.4.1. All coating materials should be provided from a manufacturer or dealer with at least 5 years successful experience of materials. 2.4.2. Manufacturing projects must be approved before the implementation starts. 2.4.3. It should be a certificate which assert that all materials to be used are provided from responsible sources. 2.4.4. On-site montage should be performed by experienced teams, who have experience in similar projects or will be recommended by the manufacturer. 2.5 DELIVERY, STORAGE AND HANDLING 2.5.1. All...

TOKOZ PLASTIC & BUILDING MATERIALS INTERNATIONAL 3. MATERIALS 3.1 MAIN ELEMENTS All materials will have the quality and dimensions specified in the project. Unless otherwise indicated, technical specifications presented in the following tables and types of material shown in the details will use in the material selection. All products to be used in the system must be resistant to adverse weather conditions, corrosion and chemicals and be recyclable. The required bearing capacity per each pedestal should be a minimum of 900 kg. Foot system and ancillary products must be polypropylene-based and...

TOKOZ PLASTIC & BUILDING MATERIALS INTERNATIONAL 3.1.1 HEAD Top basement with top place and cylinder body is a gear system in which a height adjustment can be made, connecting to lower base or elevator through threads. There must be holes that positioning (joint) bars will be mounted on the top surface of topping base in order to use in the applications of coating plates with triangular, pentagonal and hexagonal, as well as rectangular, surfaces. A crack must be in the lowest gear housing to ensure that it does not disjoint from bottom base or coupler. 3.1.2 BASE Bottom basement must be designed...

TOKOZ PLASTIC & BUILDING MATERIALS INTERNATIONAL 3.1.4 JOINT STRUCTURES Thickness should be four alternatives in the form of = 2-4-6-8 mm. It will be used in the areas to be paved. Bars should be able to fasten mechanically in a way that top base, bottom base and coupler will remain together without using another junction piece. Apart from these products, an alternative should also have to a single part of joint apparatus with crosshair and 4 mm-thick. 3.1.5 CARCASS FIXING ELEMENTS It will be used in the areas to be laid wood deck (linear). Carcass fixing elements should be designed in a way...

TOKOZ PLASTIC & BUILDING MATERIALS INTERNATIONAL 3.2 AUXILIARY COMPONENTS FOR APPLICATIONS 3.2.1 AUXILIARY COMPONENTS FOR WOOD APPLICATIONS 3.2.1.1 Stainless, galvanized or plastic (polypropylene) hidden screwing apparatus 3.2.1.2 Stainless screws 3.2.1.3 Teak oil or protective paint 3.2.1.4 Tile removal apparatus (for tile deck applications) 3.2.1.5 Other hand tools necessary for completing the application 3.2.2 AUXILIARY COMPONENTS FOR STONE APPLICATIONS 3.2.2.1 Stone removal apparatus 3.2.2.2 Other hand tools necessary for completing the application 4. INSPECTION AND PREPARATION 4.1. CONTRACTOR...

TOKOZ PLASTIC & BUILDING MATERIALS INTERNATIONAL 5.1.11 Defective products should not be used and even if the laying completes, these products detected should be replaced with new ones. 5.1.12 After the laying, application areas should be cleaned and should be put under protection if necessary. 5.1.13 Final elevation of raised flooring should be established with approval of the project architect, and surface slope should be controlled with rope and gauge throughout the entire application. 5.2 LATH APPLICATION Threshold elevations on areas prepared for the application will be marked and completed...

TOKOZ PLASTIC & BUILDING MATERIALS INTERNATIONAL 5.3 TILE APPLICATION Threshold elevations on areas prepared for the application will be marked and completed on all side parapets. A modulation will be determined in a way that can minimize the edge cut and provide a visually saturation by studying on the project, and will submit for PRIME CONTRACTOR’ approval. Application can start from any corner. More than one slope apparatus will be placed and used on the top of each other in line with slope ratio. In this way, it will also allow high slopes to eliminate or reduce. Slope apparatus with different...

TOKOZ PLASTIC & BUILDING MATERIALS INTERNATIONAL