Decoline The new decorative PVC tiles of our range are perfectly adapted for tertiary environments seeking for a design and resistant floor covering. Fiche Technique Areas of Use The Decoline tiles are resistant for an intensive pedestrian traffic and light rolling traffic (< 1 T). They are particularly fitted for the following environments:  Easy and quick to install Not necessary to interrupt your activity  Impact and scratches resistant thanks to its 0.7mm wear layer  Sound Absorption of 12 dB  Easy maintenance  Modern and con

Technical data sheet PVC Floor coating tiles, removable and decorative for high traffic EN 649 Total thickness Wear layer Abrasion group Remanent punching Fire resistance Squaring variances Humid slipperiness Electrical resistance Chemical products resistance Wheelchair resistance Underfloor heating Acoustic efficiency

Maintenance and installation Guide 1) Floor preparation  For the implementation, refer to the standards NF DTU 53.2 P1-1 (concrete floor) and to the CSTB specifications 3635-V2 (existing floor).  The concrete substrate should be flat, smooth, clean, dry and sound with a degree of humidity < 7% and a surface temperature >10°. For a new concrete, it should be placed over an anti-humidity barrier and should be completely dry and hard. Make sure that the humidity cannot penetrate and damage vinyl tile by testing the humidity in compliance/ accordance with the DTU (French standards). All irregularities...

 2) Tiles preparation  48 hours before laying, store the tiles on pallets at room temperature and away from humidity (out of water, out of air). Do not stack more than 8 boxes to avoid crushing.  Usually a temperature of 15°C is required for the tile installation.  In the event of the continuation of a construction site, do not use a different batch. Inform us when ordering. 3) Floor covering installation  Chalk lines are drawn in order to plan how to start installing and avoid too many cuttings (see. fig. 1). Fig. 1 : draw up median lines so as to locate the exact centre of the room; they...

 The installation is most of the time made without glue for loads up to 1000 kg. Beyond that, the bonding is necessary with an appropriate glue (consult us if necessary). OBSTACLES Where there are obstacles, the cutting will be done around the obstacle as installation progresses, taking into account a perimeter expansion gap of 5 mm. · Obstacles are either fixed elements such as pillars or pipes, or removable elements such as machines or any other device over 50kg. 4) Floor covering maintenance After the installation, it is essential to sweep and/or vacuum the dust and dirt and clean the floor...