Technical data sheet Siwss Pine Natur!Pur Short description Multi-layer parquet element (3-ply) in conformity with EN 13489 (type 4 country house appearance) with glueless connection profile for floating installation, also suitable for fullspread gluing. floating installation full spread gluing Suitable for living spaces with a regular room climate with 40 to 60 % relative air humidity and between 16 and 24 ° C. Not suitable for damp locations and wet locations. Order number

In accordance with the standards, a dry, well prepared, stable subfloor with an evenness within the tolerances of DIN 18202, table 3, line 4 is required (for further Information, see "TI 110 Information Inspection Requirements en.pdf"). The floorboards to be installed and the substrate must be sufficiently acclimatized, the inspection obligations of the subfloor must be fulfilled in accordance with DIN 18365 “Flooring works” or DIN 18356 "Laying of parquet flooring and wood block flooring” and ÖN B2236/B5236 or, depending on the country, the corresponding standards and requirements; the applicability...

Technical data Resistance to castor chair Only on polycarbonate mats with W type castors, not suitable otherwise Thermal resistance Slip resistance white glue (PVAc) D3 without formaldehyde emission Differential swell and shrink dimensions Width: 0,05 % per 1 % change in wood moisture Length: 0,03 % per 1 % change in wood moisture Brinell hardness depending on the wood species „TI_005 Information_Brinellharten_von_Holz_en.pdf” Wood moisture content Content of delivery Boards per package Environmental compatibility recyclable; tested for harmful substances; declaration of performance (DoP) and...

Underfloor heating Prefinished floor panels are suitable for low temperature / warm water radiant heating systems. Prior to the installation the subfloor must be heated up in accordance with the standards (for further information, especially for installation over electric underfloor heating systems, see "TI_025_Richtlinien_Verlegung_auf_Fussbodenheizung_en.pdf"). The maximum temperature of the surface must not exceed 29 °C, even at the edges of the room and under carpets and furniture. The heating should be equipped with flow temperature regulation. Electric floor heating systems are only suitable...

This information is provided with the intention of offering you advice based on the best of our knowledge, on the basis of our trials, experiences, tests carried out, applicable standards and the rules of the trade. Should you require any additional information, our technical and commercial advisors will be happy to assist you. Always consult our advisors for advice before starting any large-scale projects. We assume no liability for any errors and reserve the right to carry out technical modifications. Please visit www.tilo.com for further information and updates. Version : 3.00.052022 tilo...