Oak Dolomit V1526
4Pages

Technical data sheet Brief description Prefinished flooring panels with a substrate made form HDFboards; counter draw (impact sound insulation) made from 1.2 mm cork; heterogenous poly (vinyl chloride) top layer with different wear layer thicknesses floating installation full spread gluing Suitable for living spaces with a regular room climate with 40 to 60 % relative air humidity and between 16 and 24 ° C. Not suitable for damp locations and wet locations. Order number

In accordance with the standards, a dry, well prepared, stable subfloor with an evenness within the tolerances of DIN 18202, table 3, line 4 is required (for further Information, see "TI 110 Information Inspection Requirements en.pdf"). The floorboards to be installed and the substrate must be sufficiently acclimatized, the inspection obligations of the subfloor must be fulfilled in accordance with DIN 18365 “Flooring works” or DIN 18356 "Laying of parquet flooring and wood block flooring” and ÖN B2236/B5236 or, depending on the country, the corresponding standards and requirements; the...

Resistance to castor chair suitable with softrolls (w) - no delamination, minor EN 425 surface changes are possible Impact sound reduction Thermal resistance Slip resistance dispersion glue without formaldehyde emission Assessment of static electrical not antistatic propensity Determination of dimensional variations after changes in ≤ 0,25 % climate conditions Determination of staining and domestic chemicals 0 = resistance to chemicals no change Colour fastness Window areas Please note that in rooms with large windows in particular, changes in colour caused by UV light cannot be ruled out...

Environmental compatibility Underfloor heating declaration of performance (DoP) and CE marking; declaration of harmlessness; REACH declaration; French regulation “Arrêtéétiquetage, Décret n° 2011-321 du 23 mars 2011” (A+); TÜV PROFiCERT-product Interior PREMIUM certificate Reg.no. 70 720 5623-2 Prefinished floor panels are suitable for low temperature / warm water radiant heating systems. Prior to the installation the subfloor must be heated up in accordance with the standards (for further information, especially for installation over electric underfloor heating systems, see...